Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Magnum Manuals
  4. Folding Machines
  5. MFM-PS
  6. Product instruction manual

Magnum MFM-PS Product Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Product instruction manual
Magnum® MFM-PS Folding System
Magnum Folders have been designed to be user friendly,
however we strongly recommend you take a few minutes
to read through this manual to ensure correct operation.
Keep this manual safe for future reference.

Advertisement

loading

Related Manuals for Magnum MFM-PS

Summary of Contents for Magnum MFM-PS

  • Page 1 Product instruction manual Magnum® MFM-PS Folding System Magnum Folders have been designed to be user friendly, however we strongly recommend you take a few minutes to read through this manual to ensure correct operation. Keep this manual safe for future reference.

  • Page 2: Specifications

    Contents Page 2 - Specifications Page 3 - Introduction Page 4 - Safety Instructions and environmental requirements Page 5 - Information before use Page 6 - Parts Page 8 - How to use Pages 16 & 17 - Fine Adjustments Page 22 - Warranty and incorrect use Specifications Paper Size...
  • Page 3 Introduction Thank you for purchasing the Magnum MFM-PS Folding System. This system enables users to achieve greater efficiency in clerical work by releasing them from paper-folding work that has manually been performed in the past. Please read these instructions carefully before starting to use the system to ensure you get the best results and are competent at operation.
  • Page 4 Safety Instructions • Make sure that the system is electrically grounded. This prevents an electric shock when there is a leak of electricity. • Use the system at 110 – 120 VAC, 220 – 240 VAC with a frequency of 50Hz to 60Hz. A fire may start or the system may break down if a higher or lower voltage is used, or if an electric current with a frequency that is not within the range of frequency stated above.
  • Page 5 Information Before Use 1. Precautions on Installation Do not install it in an unstable place such as on a faltering bench or an inclined place. It may fall down or drop and cause an injury. Do not install it in a dusty place or a place of high humidity. It may cause a fire, or an electric shock.
  • Page 6 Parts Number Name Number Name Roller cover (10) Control panel Left side cover (11) Right side cover Paper feed roller (12) Table B Paper guide (13) Paper feed table lever Feed table (14) Table A socket Auxiliary feed table (15) Table B socket Paper ejection roller (16)
  • Page 7 Operation Panel and Functions Designation/Indication Function Speed adjustment key Used for adjusting the speed. Store key Select memory 1/2 stored folding position and the folding position after adjustment is stored. Memory 1/2 lamp Two special folding types are stored. Select key Used for selecting paper length, the feed position of table A and B, indicating of the counter when lights are off.
  • Page 8 How to Use 1. Preparation (1) Install the rollers...
  • Page 9 (2) Install table A and B, before starting the system 1. Position of Table A’s notch and 2. Insert the front notched part of Table A connector. into the stud (1) of the system and drop its rear notched part on the stud (2). Insert the plug into the connector (3).
  • Page 10 2. Indication of the counter (1) Addition counter When the three lamps are off, the number indicates the counter. Press start/stop key after choosing the fold type, it automatically counts the folded paper. Press the Clear/Reset key and reset the number at zero (0).
  • Page 11 3. How to use (1) Standard folding of standard size paper Set the standard-size paper. Loosen the paper guide. Set screw and set the paper guide to fit the width of the paper. Stack the paper on the paper feed table with its printed side facing up (its printed side down in case of fold-out) after neatly arranging it.
  • Page 12 3. How to use (3) Selecting the folding type One of the six folding types (Single, Gate, Letter, Zigzag, Double, Parallel Fold-out) can be selected. Press the desired folding type key. (4) Before folding, press Test key, Table A/B move to the position of designated fold type, one sheet will be folded.
  • Page 13 (3) After inputting the paper length, press store key, choose store at 1 or 2. (press store key and release memory lamp will shift light between 1 and 2; hold pressing store key until “beep” sound, means paper length stored) When paper length is stored, system will adjust 6 fold types according to paper length.
  • Page 14 3.1 Cross Folding Cross folding can be used if, for example, the sheet of A3-size paper folded using the double parallel folding method is still too large to be enclosed in envelope. The maximum weight of paper that can be used for cross folding is 105g/m2.
  • Page 15 3.3 Table Stopper Adjustment After moving the stop by fold guide fine adjustment dial, make sure to press Test key before the Start/Stop key. Otherwise, adjustment will not be accepted. Note: If you press Start/Stop key, after adjusting the fold guide, the fold guide will return to origin to fold.
  • Page 16 Fine Adjustment for Table A...
  • Page 17 Fine Adjustment for Table B...
  • Page 18 4. Storage 4.1 Standard-size paper fold storage After adjusting the standard paper (A3,B4,A4,B5,A5,B6), it would be stored into fold type key. One fold type key can store 6 kinds of standard-size paper. (Maximum storage: 6 x 6=36) You are able to store the folding speed, the positions of the Table A and B.
  • Page 19 4.3 Cancel single storage Recover the folding storage set by the manufacturer by Clear/Reset key. Select the key in which the storage needs to be cancelled, keep pressing Clear/Reset key until “beep” sound, and release immediately. 4.4 Cancel all storage Recover folding storage set by the manufacturer by cancel all storage.
  • Page 20 6. Change paper feed roller and rubber pad Open Roller cover, push the roller to the right side, pull the other side of the roller to remove. Change roller Rubber pad Remove rubber pad Raise the back side to remove pad Install rubber pad Install the pad as in the photo right Make sure paper feed roller and roller pad are...
  • Page 22 IMPORTANT INFORMATION Your Magnum Folding Machine should reach you in perfect condition, however please retain all of the original packaging once you have unpacked your Folding Machine in case you need to return it for repair. If your machine arrives damaged or faulty in anyway, this must be reported to your supplier immediately.