System Settings/Vi Settings; Audio Settings; Assigning Device Control For Connected Av-Source; Rear-View Camera Function - usbLogic USB-MK-AUX Manual

3.6.

System settings/VI SETTINGS

You must make some settings in the "VI SETTINGS" menu
to enable the usbLOGiC's functions.
Press 3x the "MENU" key to access the "VI
SETTINGS" menu of the usbLOGiC.
Use the right knob to make changes
within the "VI SETTINGS" menu.
Press 1x the "MENU" key to exit the "VI
SETTINGS" menu.

3.6.1. Audio settings

It is necessary to set the audio settings to "AUX" and "CD
EMU OFF" to use the usbLOGiC.

3.6.2. Assigning device control for connected AV-source

Select control levels setup "CH2: RCxx" in the "VI
SETTINGS" menu and assign related IR-code as described
in device control table by turning the right knob.

3.6.3. Rear-view camera function

Set the rear-view camera setting to "RVC: ON" to use the
rear-view camera input of the usbLOGiC. After the setting
the automatic switching to rear-view camera input is
activated when reverse gear is engaged.
Note: After the reverse gear is disengaged, the monitor
stays on camera video until the vehicle reaches a speed of
10 km/h. To leave the camera video press the right knob.
Version 17.04.2012 DVB-MK-AUX