Table of Contents
Advertisement
Quick Links
usbLOGiC USB-AV-Player
USB-MK-AUX
for BMW Professional navigation systems
without iDrive (MK2-MK4)
Product features
• USB-port for media up to 2 TB (2000GB)
• supports FAT32 and NTFS formatted media
• multi partition capable
• compatible with MP3, AVI, VOB, MOV, RMVB, JPG and many more
• last position memory
• integrated into and controllable by vehicle infotainment
• AV-input with IR-control channel
• control of after-market devices by OEM buttons, e.g. DVD-player, USB/iPod devices, ...
• after-market rear-view camera input
• automatic switching to rear-view camera input
• rear-view camera power (+12V max 1A)
• rear-seat-entertainment AV-output
• optional remote control for full USB functions/rear-seat-entertainment
• power on remote out trigger signal (+12V max 1A) to switch on connected devices
• video-in-motion
Version 17.04.2012
DVB-MK-AUX
Advertisement
Table of Contents
Related Manuals for usbLogic USB-MK-AUX
Summary of Contents for usbLogic USB-MK-AUX
- Page 1 USB-AV-Player USB-MK-AUX for BMW Professional navigation systems without iDrive (MK2-MK4) Product features • USB-port for media up to 2 TB (2000GB) • supports FAT32 and NTFS formatted media • multi partition capable • compatible with MP3, AVI, VOB, MOV, RMVB, JPG and many more •...
-
Page 2: Table Of Contents
Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 2. Connection schema 3. Installation 3.1. Interconnecting USB-box and harnesses 3.2. Connections to navigation computer 3.3. Connections to radio module 3.4. USB and optional IR-remote control set 3.5. -
Page 3: Prior To Installation
Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. -
Page 4: Check Compatibility Of Vehicle And Accessories
1.2. Check compatibility of vehicle and accessories Requirements Vehicle 3series (E46), 5series (E39), 7series (E38), X5 (E53), X3 (E83), Z4 (E85/86), Mini R56 till approx 09/2006 with AUX-input at the radio module (from approx 10/2002) Navigation Navigation system Professional without iDrive (MK2-MK4) Limitations Factory-audio-AUX-input... -
Page 5: Connection Schema
2. Connection schema Version 17.04.2012 DVB-MK-AUX... -
Page 6: Installation
3. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. -
Page 7: Interconnecting Usb-Box And Harnesses
3.1. Interconnecting USB-box and harnesses Plug harness C3C-AV into 6pin Molex of USB-box USBC-M570. Plug harness C3C-BMW700 into 14pin of USB-box USBC-M570. Plug female 18pin AMP connector of C3C-BMW700 into male 18pin AMP connector of USB-box USBC-M570. Version 17.04.2012 DVB-MK-AUX... -
Page 8: Connections To Navigation Computer
3.2. Connections to navigation computer Disconnect blue female 18pin connector of vehicle harness from the back of the navigation computer. Plug blue male 18pin AMP connector of harness C3C-BMW700 into blue female 18pin AMP connector of vehicle harness. Plug blue female 18pin AMP connector of harness C3C-BMW700 into blue male 18pin AMP connector of navigation computer. -
Page 9: Connections To Radio Module
3.3. Connections to radio module Vehicle female Loosen the female Quadlock connector to the radio module. 12pin connector Loosen the black female 12pin connector from chamber B of the female Quadlock connector. Vehicle female Push the insert from female 12pin connector’s plastic cab 12pin connector from the side. -
Page 10: Usb And Optional Ir-Remote Control Set
3.4. USB and optional IR-remote control set Connect USB-connector of USB-installation socket USBC-EXT to USB-socket of USB- box USBC-M570 and install the USBC-EXT socket in a well accessible location, e.g. the glove-box. Make sure there is enough space to load USB-media. Installation socket for the connection of USB-media. -
Page 11: Av-Source
3.5.1. AV-source The usbLOGiC has the possibility to connect and remotely control by navigation buttons a pre-programmed device. The device list in the device control table shows the pre- programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device. -
Page 12: After-Market Rear-View Camera
3.5.3. After-market rear-view camera Connect the video RCA of the after-market rear-view camera to the female RCA connector R-CAM IN of USB-box USBC-M570. Connect the green wire of C3C-BMW700 to the camera power supply (+12V max. 1A) The green wire is high (+12V) when reverse gear is engaged. Note: Compatible with NTSC cameras only. -
Page 13: System Settings/Vi Settings
3.6. System settings/VI SETTINGS You must make some settings in the “VI SETTINGS“ menu to enable the usbLOGiC’s functions. Press 3x the “MENU“ key to access the “VI SETTINGS“ menu of the usbLOGiC. Use the right knob to make changes within the “VI SETTINGS“... -
Page 14: Operation
4. Operation 4.1. Activation of the video-in-motion function The video-in-motion function is permanently active without disturbing the navigation performance. 4.2. Selecting the usbLOGiC as current AV-source Selecting the usbLOGiC as current AV-source is activated by pressing the “MODE”-button (depending on the current mode of the system, it has to be pressed several times). -
Page 15: Button Assignment Table
4.5. Button assignment table The button assignment table shows which functions of usbLOGiC and additionally connected devices can be executed by station buttons. Once USB or AV-input mode is activated, the navigation button in the left column will execute the function described in the corresponding device column. - Page 16 Button assignment table usbLOGiC USB-MK-AUX Station button Internal DVB-T DVD-player DVD-changer iPod®-control Analog-tuner tuners SOURCE Display 1 long Selection Selection Selection Selection TV/ Selection TV/ Selection TV/ image format image format image format image image image format format format OK / PLAY...
-
Page 17: Specifications
-30°C to +80°C Weight 312g Measurements (box only) B x H x T 135 x 30 x 105 mm 6. Connections (USB-box) 7. Technical Support Caraudio-Systems Vertriebs GmbH NavLinkz GmbH manufacturer/distribution corporate sales/tech dealer-support Rheinhorststr. 22 Eurotec-Ring 45 D-67071 Ludwigshafen am Rhein...