Operation Details; Operation Instruction - FUNAI 12D-2407 Service Manual

Operation instruction

3 AUTO OPERATION
Press button to start air-conditioner. Now, fan speed is auto. Press
speed.
To stop working, please press
Setting temperature is not shown on screen of the control board when in AUTO operation.
When operation shifts from auto into heating or cooling operation, indoor fan speed can be
set in low speed, middle speed, high speed or auto mode.
After air-conditioner operation for about 15 minutes, if you feel too warm or too cool, please push
C
+ +
- - or to adjust the temperature. Thus , you can get most comfort temperature.
C
Auto operation is a economical mode, which can select suitable operation mode according room-
temperature.
4 COOLING DRY AND HEATING OPERATION
Push button to start air-conditioner.
Push button to select operation. Each pushing of this button changes the mode of operation
in this order from auto airflow
Push button to set fan speed.
C
+ +
Push or
- -
C
If you feel too warm, please push
+ +
push to increase the temperature. Thus ,you can get most comfort temperature.
C
Push button again, operation will stop.
5 ADJUSTMENT OF FAN SPEED AND HOW TO DO TIMING
Press button to adjust fan speed. Fan speed changes in the recyclable order from low
speed ,middle speed
Select HIGH SPEED for stronger cooling.
To set timer-on or timer-off, push
To cancel the timer function ,please push
venting
button to set needed temperature.
C
- -
,high speed
or
button again.
cooling dry
to decrease the temperature; if you feel too cool, please
to auto
button, then push
button or
-9-
heating.
in turn when press
+ +
or to adjust time.
- -
button again.
to select fan
button once.