Table of Contents
Advertisement
User Manual
Installation
BEFORE STARTING AN INSTALLATION ENSURE ALL DEVICES ARE POWERED OFF
The Wireless Projector Server is capable of receiving separate audio & video signals up to
100m from a transmission source. Actual operational distances depend on the construction of
the surrounding building and any walls or floors that are situated between the transmitting
computer and the Wireless Projector Servers receiving antenna.
Quick Setup
These steps follow an installation using VGA equipment with Windows XP
1. Connect the Wireless Projector Server to a projector with a VGA cable.
Power up the projector
2. Power on the Wireless Projector Server. The Power LED will turn Red to Green and the
projector screen will show the default menu screen as below. The Wireless Projector
Server is now ready to use.
Important
English
Advertisement
Table of Contents
