Table of Contents
Advertisement
User Manual
English
System Status
This section shows information on the current system status; Model Name, Firmware Version,
IP Address, Subnet Mask, Default Gateway, Wireless Mac Address, Wire Mac Address,
Projecting Status and Total users
Network Setup
The default setting of the Wireless Projector Server is DHCP Auto (Dynamic Host Configuration
Protocol). When the Wireless Projector Server is connected to a LAN that already has a DHCP
server, the Wireless Projector Server will take an IP address assigned to it by that server. When
the Wireless Projector Server is connected to a LAN that does not have a DHCP server, the
Wireless Projector Server becomes the DHCP server in that network.
If you do not require the DHCP function it is recommended to select Disable
Advertisement
Table of Contents
