Asus B85-PRO Gamer User Manual page 72

2.7.1 CPU Temperature [xxx°C/xxx°F]
The onboard hardware monitor automatically detects and displays the CPU temperature.
Select Ignore if you do not wish to display the detected temperature.
2.7.2 MB Temperature [xxx°C/xxx°F]
The onboard hardware monitor automatically detects and displays the mobtherboard
temperature. Select Ignore if you do not wish to display the detected temperature.
2.7.3 CPU Fan Speed, CPU Optional Fan Speed, Chassis
Fan 1 / Chassis Fan 2 / Chassis Fan 3 Speed [xxxx
RPM] or [Ignore] / [Monitor]
The onboard hardware monitor automatically detects and displays the CPU Fan Speed /
CPU Optional Fan Speed / Chassis fan 1, 2, and 3 speeds in rotations per minute (RPM). If
the fan is not connected to the motherboard, the field shows N/A. Select Ignore if you do not
wish to display the detected speed.
2.7.4 CPU Core 0 / CPU Core 1 / CPU Core 2 / CPU Core 3
Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignore if you do not want to detect this item.
2.7.5 CPU Q-Fan Control [Auto]
[Disabled]
[Auto]
[Advance Mode] Select this mode for the DC mode Q-Fan control when a 3-pin CPU fan is
CPU Fan Speed Low Limit [200 RPM]
This item appears only when you enable the CPU Q-Fan Control feature and allows you
to disable or set the CPU fan warning speed. Configuration options: [Ignore] [100RPM]
[200RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows you to
set the appropriate performance level of the CPU fan.
[Standard]
[Silent]
[Turbo]
[Manual]
2-36
Disables the CPU Q-Fan control feature.
Enables the CPU Q-Fan control for 4-pin CPU fan.
installed.
Sets to [Standard] to make the CPU fan automatically adjust depending on
the CPU temperature.
Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
Sets to [Turbo] to achieve maximum CPU fan speed.
Sets to [Manual] to assign detailed fan speed control parameters.
Chapter 2: Getting started