Calibrate Temperature; Electrical Version; Showroom Program; Demo Mode - Miele H6580BP Operating And Installation Instructions

Calibrate temperature

Using temperature calibration the
temperature can be modified, in all
modes and MasterChef programs, so
that it is slightly higher or lower than
shown.
The temperature calibration is
represented by a bar with seven
segments.

If all of the segments are filled the oven
temperature is much higher than
indicated in the display. If no segment
is filled the oven temperature is much
lower than indicated.
 Select or , to adjust the
+ -
temperature calibration.
 Confirm with OK.

Electrical Version

Setting the voltage (electrical version)
 Select the desired voltage and
corresponding frequency.
 Confirm with OK.

Showroom program

This function enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for
domestic use.

Demo Mode

If you have demo mode activated
Demo mode active. The appliance will not
will appear when you turn on
heat up
the oven.
–
On
Press and hold OK for at least 4
seconds to activate demo mode.
–
Off
Press and hold OK for at least 4
seconds to deactivate demo mode.
The oven can then be used as
normal.
Settings
37