Yamaha YZ250F 2008 Owner's Service Manual page 155

4. Tighten:
• Pinch bolt (upper bracket) "1"
Pinch bolt (upper brack-
et):
21 Nm (2.1 m•kg, 15
ft•lb)
• Pinch bolt (lower bracket) "2"
Pinch bolt (lower brack-
et):
21 Nm (2.1 m•kg, 15
ft•lb)
Tighten the lower bracket to speci-
fied torque. If torqued too much, it
may cause the front fork to mal-
function.
5. Install:
• Protector "1"
• Bolt (protector) "2"
Bolt (protector):
5 Nm (0.5 m•kg, 3.6
ft•lb)
6. Adjust:
• Rebound damping force
Turn in the damping adjuster "1" fin-
ger-tight and then turn out to the orig-
inally set position.
7. Adjust:
• Compression damping force
Turn in the damping adjuster "1" fin-
ger-tight and then turn out to the orig-
inally set position.
5-23
FRONT FORK