Disconnect the GPS antenna cable (F).
2.
If the GPS antenna needs replacement, perform the procedures in
a.
Removal
If the GPS antenna does not need a replacement, do not detach the metallic tape securing
b.
the GPS antenna to the mainboard. This may damage the metallic tape and cause the
GPS signal to deteriorate. Instead, perform the procedures below:
(1)
G
F
(2)
3-51
on page 3-46.
Disconnect the GPS antenna cable connector (F) from the mainboard
connector, and then pry to lift the circuit cover (G).
Figure 3:80. Disconnecting the GPS Antenna Cable
Open the circuit cover to detach the GPS antenna from the mainboard.
Figure 3:81. Detaching the GPS Antenna
(Figure
3:79, page 3-50)
GPS Antenna
Service and Maintenance