Insignia NS-BLSS02 User Manual page 12

5 Lift the glass pitcher out of the pitcher collar, then lift the blade
assembly out of the pitcher collar.
6 Remove the sealing gaskets from the blade assembly and pitcher
collar.
7 Wash the glass pitcher, blade assembly, sealing gasket, and two-piece
lid in warm, soapy water. Rinse well and dry thoroughly.
8 Wipe the exterior surfaces of the base with a soft, moist cloth. NEVER
IMMERSE THE BLENDER BASE (MOTOR HOUSING), POWER CORD, OR
PLUG IN WATER OR ANY OTHER LIQUID. Do not use harsh chemicals or
abrasive cleaners on any part of your blender.
9 Re-assemble your blender. See "Assembling your blender" on page 6.
12
www.insigniaproducts.com
Insignia NS-BLSS02 Blender