Insignia NS-BLSS6 Quick Setup Manual

IMPORTANT
SAFEGUARDS
When using electrical appliances, basic safety
precautions should always be followed including
the following:
• Read all instructions carefully before you use the
appliance.
• Make sure your electricity supply is the same as
the one shown on the rating label.
• To protect against risk of electrical shock, do not
put the blender base in water or other liquid.
• This appliance should not be used by children and
close supervision should be taken when used
near children.
• Unplug from the electrical outlet when it is not in
use, before putting on or taking off parts, and
before cleaning.
• Avoid contacting moving parts.
• Keep hands, hair, clothing, as well as spatulas and
other utensils away from beaters during operation
to reduce the risk of injury to persons, and/or
damage to the mixer. A scraper may be used but
only when the blender is not running.
• Never add to the blender jar while the blender is
operating.
• Check the filler cap for the presence of foreign
objects before using.
• Do not operate the appliance with a damaged
cord or plug or after the appliance malfunctions,
or is dropped or damaged. Return the appliance
to the nearest authorized service facility for
examination, repair, or electrical or mechanical
adjustment.
• The use of attachments is not recommended by
the manufacturer and may cause a risk of
personal injury.
• Do not use outdoors.
• Do not let the cord hang over edge of a table or
counter.
Before using your new product, please read
these instructions to prevent any damage.
• Never let the cord touch hot surfaces, including the
stove, or hang down where a child could grab it.
• Blades are sharp, handle carefully.
• To reduce the risk of injury, never place the blade
assembly on the base without the jar properly
attached.
• Always operate the blender with the cover in place.
• Make sure that fingers are kept well away from the
blades when in use.
• Do not blend hot ingredients.
• Always operate on a flat surface.
• Make sure that the control dial is in the off '0'
position before plugging into the power outlet.
• Do not operate for more than one minute at a time.
• Always turn the power off before you insert or
remove a plug. Remove by grasping the plug. Do
not pull on the cord.
• Do not use an appliance for any purpose other than
its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element, or on a heated oven. Do not
place on top of any other appliance.
• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch any
hot surface.
• Never touch the blades while the machine is
plugged in.
• Take special care when emptying and cleaning the
blender jar, as the blades are extremely sharp.
• The blender jar must be properly in place before
operating the blender.
• This appliance has a polarized plug (one blade is
wider than other). To reduce the risk of electric shock,
this plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit contact a qualified
electrician. Do not modify the plug in any way.
• This product is for household use only.
SAVE THESE
INSTRUCTIONS
Insignia Stainless Steel Blender

PACKAGE CONTENTS

• Blender
• Quick Setup Guide
Filler cap
Lid
Blender jar
50.7 oz.
(1.5 liters)
Blade assembly
Base
Pulse button
Control knob
Power cord
Plastic feet
Quick Setup Guide |

FEATURES

• A quick and easy way to prepare your favorite foods
and refreshments
• Three speeds with pulse for precise blending
• Tough stainless steel blade for crushing ice
• Filler cap with 3 oz measuring cup
Note: Before using your blender for the first time, wash all
parts and dry thoroughly. Do not immerse the base in water.

USING YOUR BLENDER

1 Place the base on the table, with the control knob
facing toward you.
2 Place the blender jar onto the base, then turn the
blender jar to the right until it clicks into place. The
arrows on the blender jar should be aligned with
the lock mark on the base to make sure the jar is
locked into place.
Note: Your blender will not work unless the blender jar is
locked into place.
3 Remove the lid or the filler cap from the blender jar
and place ingredients into the jar. Do not exceed
the maximum indicated level (1.5 liters).
NS-BLSS6