Bypass, Channel Select, Soft Keys And Alphanumeric Display - Klark Teknik DN9340E Operator's Manual

Controls, Connectors, Indicators: DN9340E

3.2. Bypass, Channel Select, Soft Keys and Alphanumeric Display

1 2
1 BYPASS button
Channel SELECT button
2
3 Soft keys
5 Alphanumeric display
On the home page this bypasses the complete unit for the
selected channel (both channels if linked). When a
particular EQ type is selected (by the buttons above the
bypass switch), the bypass operates on that type of EQ only.
Press to select either channel A or B for control. If the unit
is linked for stereo operation both indicators will be
illuminated and the button will be inoperative.
Soft keys for selecting options and secondary functions.
These keys illuminate to indicate whether they are active in
a particular mode or not.
This shows parameter values for the current function being
controlled by the encoder knobs. In general, when setting
parameters, the labelling is directly above the relevant knob,
with the title on the top row and the value on the bottom
row.
When selecting options or entering text, the top row shows
the title on the left with the knob functions, separated by
commas, on the right. The status is on the bottom row.
8
3 4