Pitch Modulation; Pitch Lfo1 - Kohler KD-60 Owner's Manual

For example, if you set this to -60 and move the PB wheel all
the way to the low position, the pitch will fall five octaves
below the original pitch. This can be used to simulate the
downward swoops that a guitarist produces using the trem-
olo arm.
-60...+12 Maximum pitch change in semitones.

Pitch modulation

AMS (Alternate Modulation Source)
This parameter selects the source that will modulate the pitch
of the selected oscillator. See "AMS (Alternate Modulation
Source) list" on page 14-21.
Intensity
This parameter specifies the depth and direction of the effect
produced by "AMS". With a setting of 0, no modulation will
be applied. With a setting of 12.00, the pitch will change up to
one octave.
For example, if you set "AMS" to After Touch and apply pres-
sure to the keyboard, the pitch will rise if this parameter is set
to a positive (+) value, or fall if this parameter is set to a neg-
ative (–) value. The range is a maximum of one octave.
-12.00...+12.00
Parameter value.
Pitch EG modulation
EG
Intensity
This parameter specifies the depth and direction of the mod-
ulation that the pitch EG specified on "Page 6 - Pitch EG" will
apply to the pitch. With a setting of 12.00, the pitch will
change a maximum of ±1 octave.
-12.00...+12.00
Parameter value.
EG AMS (EG Alternate Modulation Source)
This parameter selects the source that will modulate the pitch
EG of the selected oscillator. See "AMS (Alternate Modula-
tion Source) list" on page 14-21).
Intensity (AMS Intensity)
This parameter specifies the depth and direction of the effect
that "AMS" will have. For example, if you set "AMS" to Veloc-
ity and set this value to +12.00, the velocity will control the
range of pitch change produced by the pitch EG in a range of
±1 octave. As you play more softly, the pitch change will draw
closer to the pitch EG levels.
Pitch change (level)
Note-on Note-on
Note-off
Softly played Strongly played with
a positive (+) value
(Intensity (Pitch EG) setting)
Note-on
Note-off
Note-off
Strongly played with a
negative (–) value
Program operating mode
Note: "Intensity" (Pitch EG) and AMS will be added to deter-
mine the depth and direction of the pitch modulation applied by
the pitch EG.
Portamento
Portamento
This parameter turns the portamento effect (smooth change
in pitch from one note to the next) on/off, and specifies how
it will be applied.
Note: Portamento will also be switched when CC#65 (Porta-
mento SW) is received.
On Portamento will be applied.
Off Portamento will not be applied.
Portamento Time
This parameter sets the portamento time. Increasing the
value will produce a slower change in pitch.
000...127 Portamento time in MIDI value.
PAGE 4 - PITCH LFO1
In this page you can set the LFO1 modulation parameters for
the selected oscillator.
Pitch LF01 |Osc1
Selected:
Intensity:
Joystick +Y:
AMS
Selected
Use this parameter to select an oscillator to put in edit. Alter-
natively, you can select oscillators using the F1-F4 buttons.
Intensity
This parameter specifies the depth and direction of the pitch
modulation applied by the LFO1 settings you made on "Page
17 - LFO1". With a setting of 12.00, a maximum of ±1 octave
of pitch modulation will be applied. Negative (–) values will
invert the LFO waveform.
-12.00...+12.00
Intensity depth and direction.
JS+Y (MOD Wheel)
This parameter specifies the depth and direction of the effect
that MOD movement in the +Y direction (away from your-
self) will have on the pitch modulation applied by the LFO1.
As this value is increased, moving the MOD wheel in the +Y
direction will cause the LFO1 to produce deeper pitch modu-
lation. With a setting of 12.00 a maximum of ±1 octave of
pitch modulation will be applied. Negative (–) values will
invert the LFO waveform.
-12.00...+12.00
MOD wheel action depth.
14-7
Page 4 - Pitch LFO1
Osc1
0.00
+0.07
ChannelAT