PRE-DELIVERY INSPECTION
12.BATTERY
Check the battery terminals to make sure that no
rust or corrosions due to fluid leaks are found.
Check that the battery caps are securely tightened.
(B)
(C)
(A) Cap
(B) Upper level
(C) Lower level
13.BRAKE FLUID
Check the brake fluid amount. If the amount is in-
sufficient, carry out a brake line test to identify
brake fluid leaks and check the brake operation. Af-
ter that, refill the brake fluid tank with the specified
type of fluid.
14.ENGINE OIL
Check the engine oil amount. If the amount is insuf-
ficient, check that no leaks are found. Then, add
the necessary amount of the specified engine oil.
(B)
(A)
(A) Oil level gauge
(B) Engine oil filler cap
(C) Upper level
(D) Lower level
(E) Approx. 12 (1.1 US qt, 0.9 Imp qt)
PRE-DELIVERY INSPECTION
(A)
PI-00012
(C)
(E)
(D)
LU-00105
PI-8
15.TRANSMISSION FLUID
Check the transmission fluid amount. If the amount
is insufficient, check that no leaks are found. Then,
add the necessary amount of the specified fluid.
(A)
(A) Oil level gauge
(B) Upper level
(C) Lower level
16.AT FRONT DIFFERENTIAL OIL
Check the AT front differential oil amount. If the
amount is insufficient, check that no leaks are
found. Then, add the necessary amount of the
specified AT front differential oil.
(B)
(C)
(A) Oil level gauge
(B) Upper level
(C) Lower level
17.COOLANT
Check the coolant amount on the reservoir. If the
amount is insufficient, check that no leaks are
found. Then, add the necessary amount of coolant
with the specified concentration.
(B)
(C)
PM-00030
(A)
PM-00035