Technical Specifications - Rega DAC-R User Manual

Technical Specifications

DAC 2x Wolfson WM8742
Frequency Response (100KΩ load) Filter 1 selected
Low data rate
44.1/48KHz = 10Hz -0.05dB to (44.1K) 20.02KHz (48K) 21.7KHz -0.03dB
Medium data rate
88.2/96KHz = 10Hz -0.05dB to (88.1K) 28.7KHz (96K) 31.2KHz -3dB
High data rate
176.4/192KHz = 10Hz -0.05dB to (176.4K) 44.1KHz (192K) 47.7KHz -3dB
Maximum output level = 2.175V into 100KΩ load
Bit resolution (all inputs) 16 to 24bit
Supported data rates = 32, 44.1, 48, 88.2, 96, 176.4, 192KHz
Total Harmonic Distortion all inputs (24bit 96KHz) = 0.006% @ 1KHz
Signal to Noise Ratio -105dB
(relative to maximum output level with a 100Hz to 22KHz bandwidth)
Digital inputs
USB Asynchronous Isolated (24bit 44.1/48/88.2/96/176.4/192KHz)
Input 1 Optical/Toslink (24bit 32/44.1/48/88.2/96/176.4/192KHz)
Input 2 Optical /Toslink (24bit 32/44.1/48/88.2/96/176.4/192KHz)
Input 3 Isolated 75Ω Co-axial (24bit 32/44.1/48/88.2/96/176.4/192KHz)
Input 4 Isolated 75Ω Co-axial (24bit32/44.1/48/88.2/96/176.4/192KHz)
Digital SPDIF outputs (via receiver & PLL)
Optical/Toslink
Isolated 75Ω Co-axial
Power 230v/115v/7.6W
Dimensions in cm W 21.5 x D 32 x H 8
Remote NEC system (6E91)
Weight 4.0 Kg
10