Chapter 1
5
Using the Setup Wizard
Once Traktor 2 runs, it will automatically open its
"Setup Wizard" (Figure 5). At this time, make
sure that the Kontrol S4 is plugged in to the
computer via its USB cable (labeled as "A" in
Figure 5). Once the controller is plugged in, click
"next" to continue.
A
Figure 5: Setup Wizard
The Kontrol S4 is considered an "external hardware controller" in Traktor 2. When
asked if using an external controller during the setup wizard, select "Yes" from the
dropdown menu and then select next. On the next screen, select "Native Instruments" as
your manufacturer and "Kontrol S4" as your model (These options may be selected as
your default already).
The Kontrol S4 requires only two track decks even
though it may be used with other controlling
hardware. Because only the Kontrol S4 is used in
this manual, select "2 Track Decks" from the setup
drop down menu in the "Deck Layout Selection"
window (Figure 6) and click next. The final window
in the setup wizard displays all of the options that
were chosen and should appear as it does in Figure
7.
Figure 6: Deck Layout Selection
Select "Finish" and complete the programs setup to
move on to customizing your program view.
Figure 7: Finalizing Setup
Need help?
Do you have a question about the Traktor 2 and is the answer not in the manual?