Setting Start Conditions - Escort iLog User Manual

Setting start conditions

Following the 'Date/Time' window is the 'Start-up' window (see figure 1.15), which allows for the
selection and configuration of you iLog's start-up settings. This window allows users to enter a
logger's trip duration from 0 to 60 days, define your loggers recording intervals (1 hour to 10
days), enter your logger start conditions (magnetic start, or programmed start), enter your logger
finish date and time, select whether you require continuous background logging and provides the
ability to enable the beeper within the logger.
Enter trip duration by clicking
on the drop down box
Enter your logger's start
settings by selecting the
scrolling arrows
Select tick box to
enable the beeper
r
within you logge
Figure 1.15 – 'Program and Configure – Startup' window
iLog User Guide
Enter your logger's reading interval
settings by selecting the scrolling
arrows
Program your logger
for continuous logging
18
option.
Enter your logger's
finishing settings by
selecting the
scrolling arrows