Technical Specifications - Klutch 7500K Welder/Generator User Manual

7500K Welder/Generator USE AND CARE

Do not modify the 7500K Welder/Generator in any way. Unauthorized modification may
impair the function and/or safety and could affect the life of the equipment. There are specific
applications for which the 7500K Welder/Generator was designed.

Always check of damaged or worn out parts before using the 7500K Welder/Generator.
Broken parts will affect the 7500K Welder/Generator operation. Replace or repair damaged or
worn parts immediately.

Store idle 7500K Welder/Generator. When the 7500K Welder/Generator is not in use, store it
in a secure place out of the reach of children. Inspect it for good working condition prior to
storage and before re-use.

TECHNICAL SPECIFICATIONS

Generator Specifications
Welder Specifications
Engine Specifications
Entire Unit
KNOW YOUR WELDER
Description
The KLUTCH 7500K Welder/Generator is a 6000 Watt (6600 Watt Peak) generator and DC only
stick welder with an exceptionally smooth stick welding performance. It is intended for use for
welding steel, stainless steel, cast iron and hard surfacing using electrodes from 1/16 inch to 5/32
inch.
It is powered by one of the best engines in the business. The Kohler CH440 provides 14 HP of
power to supply the185 Amp DC welding output and auxiliary power up to 6000 watts through the
120V Duplex Receptacles and the 240V Twist Lock Receptacle. This unit is supplied with a 12 ft
ground cable with clamp and a 18 ft electrode holder with cable for stick welding operations. Its
built-in wheel barrel style cart and rugged wheels makes this unit easy to move around.
Item
Output Frequency
Output Voltage
Output Range
Peak Output
Rated Output
Output Phase
Operational Time
No Load Voltage
Output Range
Duty Cycle
Electrode Diameters
Engine Model
Cooling Method
Type
CC
Horse Power
RPM
Fuel Type
Start Type
Fuel Capacity
Dimensions
Weight
Page 7
60 HZ
120V AC / 240V AC
25A / 40A
6600 Watts
6000 Watts
Single Phase
8 hours
75V DC
60 to 185 Amp DC
30% @ 150 Amp DC
1/16 inch to 5/32 inch
Kohler CH440
Air Cooled
4 stroke
429
14 HP
3600
Gasoline
Re-Coil
5 gallon
31.5" x 23.5" x 28.5"
230 lbs
of 18
Description