Nokia X1-00 Service Manual page 14

13) Remove the KEYMAT.
15) Unscrew the four Torx+ size 4 screws.
17) Remove the ENGINE BOARD.
14
14) Protect the DISPLAY with a protective film.
16) Use the SRT-6 to release the ENGINE BOARD.
18) Release the two clips holding the UI SHIELDING
with the SS-93.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia X1-00
RM-732 / RM-733
Service Manual Level 1&2
Version 1.0