Linking driving position memory with door unlock operation
Record your driving position to button 1 or 2 before performing the fol-
lowing.
Turn the "ENGINE START STOP" switch OFF and close the
STEP
1
driver's door.
STEP
2
Open one of the doors.
STEP
3
If a door is not opened within 60 seconds after
doors will be locked again and the alarm will automatically be set.
In case that the alarm is triggered, immediately stop the alarm.
(→P. 72)
Canceling the linked door unlock operation
n
Turn the "ENGINE START STOP" switch OFF and close the driver's door.
STEP
1
While pushing the SET button, press
STEP
2
trol until the signal beeps.
Retained accessory power
n
Memorized positions (except for the steering wheel positions) can be activated up
to 30 seconds after the driver's door is opened, even after turning the "ENGINE
START STOP" switch OFF.
1-3. Adjustable components (seats, mirrors, steering wheel)
While pressing the desired button
(1 or 2), press
less remote control until the signal
beeps.
The driving position is recalled
when the driver's door is unlocked
using the entry function or wireless
remote control and the driver' s
door is opened.
on the wireless remote con-
1
on the wire-
is pressed, the
45