4-3. Do-it-yourself maintenance
Checking and replacing fuses
If any of the electrical components do not operate, a fuse may have blown.
If this happens, check and replace the fuses as necessary.
Turn the "ENGINE START STOP" switch OFF.
STEP
1
Remove the engine compartment cover.
STEP
2
→P. 304
Open the fuse box cover.
STEP
3
After a system failure, see "Fuse layout and amperage ratings"
STEP
4
(→P. 338) for details about which fuse to check.
STEP
5
336
Engine compartment
Push the tabs in and lift the lid
off.
Driver's
side
panel
Remove the lid.
Remove the fuse with the pull-
out tool.
instrument