Antec Performance TX635 User Manual

Antec Performance TX635 User Manual

Antec power supply user's manual

Advertisement

Quick Links

USER'S MANUAL
Performance TX635 / TX640B
User's Manual

Advertisement

Table of Contents
loading

Summary of Contents for Antec Performance TX635

  • Page 1 USER’S MANUAL Performance TX635 / TX640B User's Manual...
  • Page 2: Installing The Motherboard

    At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible that your new case may differ slightly from the descriptions in this manual. This isn't a problem; it's simply an improvement. As of the date of publication, all features, descriptions, and illustrations in this manual are correct.
  • Page 3 Note: Please check your motherboard manual for your USB header pin layout and make sure it matches the attached table. If it does not match this Intel standard, please call Antec customer service at (800) 22ANTEC (North America) or +31 (0) 10 462-2060 (Europe) to buy a USB adapter.
  • Page 4: Connecting The Ieee 1394 (Firewire®, I.link®) Port

    If you intend to connect the front FireWire port to an IEEE 1394 add-on card that comes with an external-type IEEE1394 connector, please call Antec customer service at (800) 22ANTEC (North America) or +31 (0) 10 462-2060 (Europe) to buy an adapter.
  • Page 5: Device Installation

    High if you choose to connect the fan to a fan control device or to the Fan-Only connector found on some Antec power supplies. A fan-controlled-device regulates the fan speed by varying the voltage to it. The voltage may start as low as 4.5 V to 5V. Connecting a TriCool set on Medium or Low to a fan-control device may result in the fan not being able to start.
  • Page 6 Connect a large 4-pin connector from the power supply to the male 4-pin connector on each of the fans. We recommend using an Antec 80mm TriCool fans to balance quiet performance with maximum cooling. Note: Please choose your fan speed wisely. In most cases, a medium or even low speed setting will be enough to supply adequate cooling.
  • Page 7 Note: Lower the guide down as low as possible without touching the CPU cooler. This is the most common way to cool a CPU that comes with a stock cooler. Performance Mode If you are a high performance user and you need extra cooling for your CPU. 1.
  • Page 8 © Copyright 2005 Antec, Inc. All rights reserved. All trademarks are the property of their respective owners. Reproduction in whole or in part without written permission is prohibited. Printed in China. Antec, Inc. 47900 Fremont Blvd. Fremont, CA 94538 Tel: 510-770-1200 Fax: 510-770-1288 Antec Europe B.V.

This manual is also suitable for:

Performance tx640b

Table of Contents