Vehicle Loading; Vehicle Certification Label - Chrysler 300 2010 Owner's Manual

Hide thumbs Also See for 300 2010:
Table of Contents

Advertisement

"gASCAP" message will display in the odometer or a
"Check Gascap" message will display in the Electronic
Vehicle Information Center (EVIC) (if equipped). If this
occurs, tighten the fuel filler cap properly and press the
TRIP ODOMETER button to turn off the message. If the
problem continues, the message will appear the next time
the vehicle is started.
A loose, improperly installed, or damaged fuel filler cap
may also turn on the MIL. Refer to "Onboard Diagnostic
System" in Section 7.

VEHICLE LOADING

The load carrying capacity of your vehicle is shown on
the "Vehicle Certification Label." This information
should be used for passenger and luggage loading as
indicated.
Do not exceed the specified Gross Vehicle Weight Rating
(GVWR) or the Gross Axle Weight Rating (GAWR).

Vehicle Certification Label

Your vehicle has a Vehicle Certification Label affixed to
the rear of the driver's door.
The label contains the following information:
• Name of manufacturer
• Month and year of manufacture
• Gross Vehicle Weight Rating (GVWR)
• Gross Axle Weight Rating (GAWR) front
• Gross Axle Weight Rating (GAWR) rear
• Vehicle Identification Number (VIN)
• Type of Vehicle
• Month Day and Hour of Manufacture (MDH)
The bar code allows a computer scanner to read the VIN.
STARTING AND OPERATING 367
5

Advertisement

Table of Contents
loading

Table of Contents