DIGITAL YACHT iNavConnect Installation & Quick Start Manual

Wireless router

Advertisement

Quick Links

Installation & Quick Start Guide
iNavConnect Wireless Router
QUICK START iNavConnect VR1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iNavConnect and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DIGITAL YACHT iNavConnect

  • Page 1 Installation & Quick Start Guide iNavConnect Wireless Router QUICK START iNavConnect VR1...
  • Page 2: Before You Start

    Congratulations on the purchase of your iNavConnect Wireless Router. It is recommended that your router is installed by a professional installer. If the iNavConnect is to be connected to the internet via a Digital Yacht WL510 long range Wi-Fi Adaptor or to a Raymarine network, it is recommended that this installation/configuration is carried out by someone with suitable IT experience and knowledge of ethernet networks.
  • Page 3  Siting of the iNavConnect is critical for Wi-Fi reception. The unit features a 5dB antenna which should give up to 30m range but it is important that the unit is sited in a central location within the boat to try and ensure that Wi-Fi reception is good in all areas of the boat.
  • Page 4  As the iNavConnect powers up the LEDs on the top side of the unit will briefly illuminate and then only the Power LED will stay illuminated. Below is an image that shows what each LED indicates.
  • Page 5: Network Configuration

    When you connect a wireless device to the iNavConnect, the “WIRELESS” LED will flash as wireless data transfer occurs. 4. Network Configuration Digital Yacht have pre-configured the iNavConnect so that in most situations it will work straight out of the box with no additional configuration required. The iNavConnect default settings are as follows; IP Address 10.0.0.1...
  • Page 6 After you have connected wirelessly to the iNavConnect as detailed in section 4, you should be able to display the WL510 login page by typing 192.168.10.20 in to the address bar of your internet browser, see screen shot below…...
  • Page 7 If this “Sync my data” function is turned on, the iPhone/iPad or Android device will try and connect to the internet via iNavConnect and when it fails, causes the Navionics App to run very slowly and not synchronise data correctly with the Raymarine MFDs.

Table of Contents