Inovalley GSM60 User Manual
Inovalley GSM60 User Manual

Inovalley GSM60 User Manual

Mobile phone inovalley

Advertisement

Quick Links

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SMARTPHONE 
Ref.: GSM60 
 
‐ User Guide – 
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GSM60 and is the answer not in the manual?

Questions and answers

Summary of Contents for Inovalley GSM60

  • Page 1             SMARTPHONE  Ref.: GSM60                                                            ‐ User Guide –   ...
  • Page 2: Table Of Contents

    CONTENTS  CONTENTS    1. FOREWORD    1.1 Acknowledgement    1.2 Precautions    1.3 Safety precautions    2. INTRODUCTION TO GSM60    2.1 Accessories    2.2 Using and preparing GSM60    3. QUICK START    3.1 Tablet phone appearance, Buttons function and Icons    GSM status and notification    3.2 Turning on/off the device    3.3 Turning of/off the screen   3.4 Using the touch screen    3.5 Home    3.6 Starting Apps    3.7 USB Connection    3.8 Enter texts    3.9 Tips for use    4. BASIC SETTING   ...
  • Page 3 4.2 Bluetooth    4.3 Display    4.4 Manage the app    4.5 SD card GSM storage    4.6 Date and time   4.7 Language settings  4.8 About the GSM    4.9 Timer ON/OFF    4.10 Security setting    5. COMMUNICATION FUNCTION   5.1 Telephone   5.2 SMS    5.3 Contacts    6. MULTIMEDIA    6.1 Music    6.2 Video    6.3 Album   6.4 Camera    6.5 FM Radio    7. INTERNET    7.1 Browser    7.2 Email   ...
  • Page 4: Foreword

    GPS  module  provides  navigation  function  if  map  app  is  installed,  and  the  built‐in  video  recording  and  photo  taking function.    This  User  Manual  introduces  the  diversified  functions  of  the  GSM60,  the  tips  of  use  and  precautions, please carefully read it before using the GSM60.   ...
  • Page 5: Precautions

     Keep the device, battery and charger away from intense impact or vibration to avoid  damage.     Keep the device, battery and charger away from extremely high or low temperature to  avoid damage.     Don’t impact or strike the GSM with sharp articles, and avoid dropping, extruding or  bending it.     Never disassemble the device and its accessories; otherwise the device or the  accessories will not be covered by our warranty.      1.3 Safety precautions      Please read the information in this section and convey them to your kids before using your GSM60.  For more information, please read and safety precautions and the precautions above.     To ensure safety driving, do not use MID when driving.   Use your GSM according to relevant regulations in hospital. Please turn off your GSM  near medical equipment.     Please turn off your GSM or which to flight mode during a flight to avoid interference  to control signal of the plane.     Please turn off the GSM near high precision equipment to avoid damage to them.     Do not disassemble the GSM and its accessories. Only qualified agents are  authorized to repair this GSM. ...
  • Page 6: Accessories

                                      Charging the battery    Before you turn on and start using GSM60, it is recommended that you charge the battery.    ●Only  the  power  adapter  and  USB  cable  provided  in  the  box  must  be  used  to  charge  the  battery.  ●Do not remove the ba ery while you are charging it using the power or car adapter.   ...
  • Page 7     1) Insert the small end of the USB cable into the USB connector.  2) Insert the other end of the USB cable into the power adapter.  3) Plug in the power adapter to an electrical outlet to start charging the battery.  ●As a safety precau on, the ba ery stops charging if it overheats.    SIM card  The SIM card contains your phone number, service details, and memory for storing phonebook  contacts and/or text messages.  Inserting the SIM card  1) Take the back cover off.  2) With the SIM card’s gold contacts facing down and its cut‐off corner facing out, insert the  SIM card all the way into the SIM card slot.  3) SIM1 support the GSM 850/900/1800/1900MHz&WCDMA 850/2100 MHz;    SIM 2 support GSM 850/900/1800/1900MHz only;  4) If you use the 2G card, you can choose any one of the both slots.      Removing the SIM card  Make sure to switch off GSM60 before removing your SIM card.  1) Take the back cover off.  2) Slide the SIM card out from the SIM card slot   ...
  • Page 8     Storage card  Use a storage card to store your photos, videos, and music.  Inserting the storage card  1) Take the back cover off.  2) Insert the micro SD card into the storage card slot with its gold contacts facing down and push it  until it clicks into place.        Removing the storage card  1) Take the back cover off.  2) Push the storage card in to eject it from its slot.  3) Slide the storage card out from its slot.   ...
  • Page 9: Quick Start

    3. QUICK START  3.1 Tablet phone appearance, Buttons function and Icons  Tablet phone appearance     Power  Press to sleep/wake the MID, press and hold to turn  the MID on/off  Volume + button (up)  Increase volume  Volume – button (down)  Decrease volume  Click  it  in  any  interface  to  return  to  main  interface,  HOME button    click and hold it to view the history  Return  button  (back)  Click it in any interface go back to previous menu   ...
  • Page 10: Turning On/Off The Device

    This button displays in the app menu  Menu button      Click it to make settings to the system or menu  Setting button      GSM60 status and notification  Notification icon  When information displays in the notification panel, click the column and slide your finger on  the  screen  to  open  the  notification  list.  Click  the  option  to  view  the  detailed  information.  Then,  click the information column and slide up to close the information window. The icons in the status  bar are shown as follow:  New email  Flight mode      USB connected  USB debugging connected        Downloading  Return  ...
  • Page 11: Turning Of/Off The Screen

    2.The shut down options include mute mode, flight mode and shut down.  3.Click Shut down to turn off the device.  3.3 Turning ON/OFF the screen  The screen will be turned off automatically when idle.  1. The screen will be turned off automatically when it is idle for certain to save power.  2. When  the  screen  is  on,  press  the  POWER  button,  the  screen  will  be  turned  off  immediately.  Turn on the screen  When  the  screen  is  off,  press  the  POWER  button  to  turn  it  on.  The  screen is  locked  at  this  time. Click the lock icon on the screen, as shown in figure 3.1, and slide to left to open the camera, ...
  • Page 12: Home

    Click               Simply  click  the to  enter  through  the  on‐screen  keypad  or  select  the  apps  and  other  items in the home menu.  Click and hold      Click and hold to open the available options of an item (such as the links in the textbox or  webpage), or move the shortcuts or apps in the home menu.  Swiftly slide or slide      Swiftly slide or slide refers to swiftly drag on the screen vertically or horizontally with your  finger.  Drag      Press on the screen with your finger before dragging and keep your finger on the screen until  the item is dragged to the destination.  Rotate    ...
  • Page 13     Figure 3.2  Extendable home interface    The home interface is extended to out side of the screen to provide more spaces for you to  place new shortcuts and tools. Press in the blank of the screen and swiftly slide left or right  to  move  to  left  or  right  outside  the  screen.  There  are  more  than  two  screens  on  the  main  interface, as shown in Figure 3‐2.1. ...
  • Page 14   Figure 3‐2.1  Manage the App icons on desktop            For Android 2.3 and below, you can create folder on the desktop, and put the icons in the  same folder. For Android 4.0, it is even simpler to create a folder, including the following  steps:  1. Move  all  icons  that  you  want  to  put  together  onto  the  same  icon,  as  shown  in  Figure 3‐2.2.  2. Then click this icon to display all app icons you have dragged into it, as shown in  Figure 3‐2.3.  Click the “Unnamed folder” at the lower edge of the black column to popup the hidden keypad,  where you can rename this folder (similar with IOS); click and hold any icon in the folder to change  its place. ...
  • Page 15   Figure 3‐2.2    Figure 3‐2.3  Delete the icons on the desktop  1. Click and hold the icon you want to delete, you will see the     Delete icon.  2. Drag the icon to the top of the Delete icon, and remove your finger when the icon  becomes red to delete it.  Change wallpaper ...
  • Page 16: Starting Apps

    1.In the Home interface, click and hold any blank on the screen, a popup window will  allow you to set the wallpaper.  2.Click the Album or Wallpaper to select a picture.    3.6 Starting Apps  Click  the    button  as  shown  in  figure  3.2  to  enter  the  main  menu  interface,  as  shown  in  figure 3.3; select the app you want to start.        3.7 USB Connection  MID storage setting  Before transferring a file, you must complete the storage mode setting of your MID:  1. Connect the MID and PC via USB cable. A prompt will appear in the notification column. ...
  • Page 17: Enter Texts

    Copy the file into the storage card  1. Connect the MID and PC via USB cable.  2. Complete MID storage setting to connect to PC successfully.  3. Click My Computer in your PC to view the contents in “Removable disk (x)”.  4. Find the file you want to copy and copy it to “Removable disk (x)”.  5. After copy, click “Close USB Device” to remove it.    Note: 1. When you GSM60 is connected to PC via USB cable, if the USB Device is opened, you will  not be able to access to the storage card on MID. If you want to do so, disconnect the USB  connection.            2. Before copying, make sure the SD card is inserted into the MID and is detected.      3.8 Enter texts  Using on‐screen keypad  When  an  app  is  started  or  a  textbox  requiring  entering  texts  or  numbers  is  selected,  the ...
  • Page 18 1. Android keypad  2. Google Pinyin input method  Select the desired input method  1. Click Setting.  2. Click Language and Input method  3. All input methods installed in the MID will be listed in the text setting region.    4. Check the input method.  Use and switch input method  ① ⑤   ④   Figure 3.5  ③ ②   1  Switch upper and lower cases  2  Switch texts input mode  3  Click to insert space  4  Click the execute the inputs  5  Delete  one  character  left  to  the  cursor.  Click  and  hold  to  delete all characters left to the cursor. ...
  • Page 19: Tips For Use

    3.9 Tips for use  Enter widget interface  In the App interface, click “Widget” on the top of the screen or slide left on the screen  to switch to the Widget interface. Click and hold any widget to create a shortcut on the  desktop. Then you can enter such app by clicking its shortcut on the desktop.          Create shortcut icon of app on the desktop  In  the  Widget  or  App  interface,  click  and  hold  any  icon  to  switch  back  to  the  desktop,  then you can drag the icon to any place on the desktop.        Prompt:  the  system  may  require  you  to  make  more  choices  before  you  can  start  the  Widget ...
  • Page 20: Bluetooth

      Figure 4.1  4.2 Bluetooth  Application of Bluetooth function    1. Click Setting in the main menu.    2. Click Bluetooth to enable it.      3.  Click  Search  device  at  the  top  right  corner  of  the  screen,  the  MID  will  search  for  nearby  Bluetooth device automatically. As shown in figure 4.2.    Figure 4.2  4.  Click  the  found  Bluetooth  device  and  enter  the  password  in  the  popup  paring  window,   ...
  • Page 21: Display

      Figure 4.3  4.3 Display  Adjust brightness of the screen  1. Click Setting.  2. Click Display, and than click Brightness.  3. In the popup bright setting interface, drag the brightness bar left or right to adjust the  brightness of the screen. As shown in figure 4.4.    Figure 4.4  4.    Click OK after the adjustment.    Adjust standby time of the screen  1. Click Setting. ...
  • Page 22: Manage The App

    2. Click Display.  3. Click “sleep”.  4. In the popup screen standby time setting interface, select the desired standby time. As  shown in figure 4.5.    figure 4.5  4.4 Manage the app  1. Select Setting in the App list.    2. Select an App, now you can manage and delete the installed app (as shown in figure 4.6).      Figure 4.6  4.5 SD card MID storage  View available space on SD card storage  1. Click Setting. ...
  • Page 23: Date And Time

    2. Click Storage.  3. View available space of the SD card.  4. View internal storage of the MID.    Safely remove the SD card  1. Click Setting.  2. Click Storage.  3. Click Remove SD card.  4. The SD card will be removed safely.    Figure 4.7    Note: To remove the SD card safely will protect the SD card and prolong its useful life.    4.6 Date and time  The  system  will  use  the  date,  time  zone  and  time  provided  by  the  network  according  to  the  setting.  Adjust date, time and time zone manually. ...
  • Page 24: Language Settings

    4.Disable auto time zone.    5.Click  Select  time  zone, then  select one  time  zone  in  the  list.  Roll  the  list  down  to  view  more time zones.    6.Click Set date, then click up or down to adjust the date, month and year, and then click  Setting to confirm.    7.Click  Set  time,  then  click  up  or  down  to  adjust  hour  and  minute,  and  select  AM or  PM  (not applicable when 24 hour time system is selected). Click Setting to confirm. ...
  • Page 25: Timer On/Off

    1. Click Setting.  2. Click About the GSM. You can view the status, model and version number of the device.  System update  1. Click Setting.  2. Click About the GSM.  3. Click  System  upgrade,  and  follow  the  instructions  (make  sure  the  SD  card  with  the  latested version is inserted).  View system version  1. Click Setting.  2. Click About the GSM.  3. You can view the model, battery and internal version.  4.9 Timer on/off  1. Click Setting.  Click  to  Click  to  2. Click Timer on/off option  enter ...
  • Page 26 GSM.  Note: when the lock screen is set, you will be required to input the unlock password or pattern  after the device is turned on or when unlocking the screen.              Set unlock pattern  1. Click Setting in the main interface.  2. Click Security.  3. Click Lock screen.  4. Select Pattern in the popup window.  5. Select Next according to the prompt.  6. In the popup unlock pattern interface, there are 9 touch points. Connect at least  4 points in the vertical, horizontal or diagonal directions, as shown in figure 4.10.  The system will record your pattern when you finger removes from the screen.    7. Click Continue.  8. When you see the prompt, draw the pattern again, and click Confirm.      Figure 4.10  Set unlock PIN  1. Click Setting in the main interface.  2. Click Security.  3. Click Lock screen.  4. Select PIN in the popup window.  5.
  • Page 27: Communication Function

    Set unlock password  1. Click Setting in the main interface.  2. Click Security.  3. Click Lock screen.  4. Select Password in the popup window.  5. Set number password (letters or numbers) and click Continue.  6. Enter the new password again and click Confirm.  5. COMMUNICATION FUNCTION  5.1 Telephone    Under the standby screen, click to dial into the dialing menu interface, tap the screen to display the  digital input the phone number you want to dial, dialing display will show dial interface.After each  hook  call  status  information  will  be  displayed  on  the  screen.  During  a  call,  if  you  need  to  enter  numbers,  please  click  the  icon  to  call  the  interface  can  be  selected.  International  calls  can  add  depending on the area code, then you can call.3G video call, you can switch back and forth each ...
  • Page 28     Contacts Call history   Numbers Display number Dial Function Hide keypad     Figure 5.1      5.2. Emergency calls    As long as you are within the network coverage (by checking the flat upper left corner of the  phone's display network signal strength indication of that), you can call the emergency services.If  your network provider does not provide roaming services in the region, the display will show "can  make an emergency call" (Emergency), tells you can only call emergency numbers.If you are within  the network coverage, even without a SIM card can make emergency calls.    5.3. Answer the phone  When  there  is  an  incoming  call,  click  on  the  "Answer"  right  under  the  locked  state  drag,  answer the call. ...
  • Page 29       5.4. Ending a call                During a call, press 'hang up' button to end the call.  When there is an incoming call, click and drag to the left under the icon locked state, reject the  call .    5.5. Call options              1)  During  the  call,  you  can  perform  many  other  operations.  The  tablet  phone  provides  hands‐free  function,  see  a  number  of  functions  the  phone  book,  text  messages,  etc.  used  during the call. When the function call using the most needed support network, please apply ...
  • Page 30: Sms

    4) Mute: During a call interface, select "Mute", you can mute the current phone, so that the  other cannot hear the phone call tablet. After starting the mute function, click on the "mute",  you can restore muted call.  5) Hold / Recovery: between the active call and the call on hold to switch.  6) Add call: initiate a new call.  7) Call Recording: support call recording features, easy recording during a call.  8)conference:initiate a conference (only use in 3G call mode)  9) more setting: any other choose  5.6. 3G Call  Notes: Only the SIM1 support the 3G card (3G call and 3G date connection); If you use the 2G  card, you can choose any one of the both slots.  1) If you insert one 3G card into the slot, and connect the data connection, it will show the “3G”  icon near SIM card connection status. (Most of the time depends on the network operator)  2) 3G Call (Call from 3G card to 3G card, if you using 3G card call 2G card, it does not support the  video model )  4) Dial a number your want call in the Dial pad and click the function button as flow figure show.    5)  Select  the  Video  call  then  the  3G  calling  start  (remark:make  sure  the  device  is  in  the  service  area)    5.7. History  Show  all  call  records  before,  according  to  all,  received  calls,  outgoing  calls,  missed  calls,  group  display, click the menu button, you can delete all call records. ...
  • Page 31 Compose a new message  1)  Click on the menu information;            2)  Click on new information;            3)  Enter the recipient's name or number;            4)  Click on the text box and enter the text message;            5)  Click Send to send a message.              Send MMS  Click  on  the  top  right  corner  of  the  accessories  that  you  can  add  to  shoot  pictures,  videos,  shoot video, audio, audio slide contacts and other accessories, it switched to MMS messages,  and send the same way as text messages.  1. Enter the main menu and select              Write New message Search  ...
  • Page 32: Contacts

    Enter number   Figure 6.3    Send the message   5.3 Contacts    Groups:  You  can  choose  to  create  a  group  in  the  SIM  card,  you  can  also  choose  to  create  a  group in the tablet phone  Contact: Display tablet phone and SIM contacts  1)  I set my personal information; You can set name, affiliation, phone, email, address,            email, etc.  2)  Find Person: search for contacts based on the first letter            3)  New ...
  • Page 33   Figure 6.4     Search for contacts: click    button to start searching.   Add new entry: click    button to enter relevant interface.       ...
  • Page 34: Multimedia

    6. MULTIMEDIA  6.1 Music    Enter  music  player:  click  music  icon    in  the  main  menu  or  desktop  to  start  music  player.  Click the desired music in the list to play it. As shown in figure 5.1:    Figure 5.1       ...
  • Page 35: Album

    Random play Repeat Track name Artist Album       Figure 5.2    Previous Pause/Play Next    Drag the progress bar to adjust play progress   For operation of the music player, refer to figure 5.2    6.2 Video player     Enter  video  player:  click    in  the  main  menu  and  select  a  video  to  play  it,  as  shown in figure 5.3 ...
  • Page 36   Figure 5.3    Adjust play Play/Pause progress Select screen mode   Figure 5.4  6.3 Gallery    The Album app can search for pictures and videos stored in the SD card automatically. It  will  classify  these  pictures  and  videos  in  different  folders.  You  can  view  and  edit  the  photos, set as wallpaper and view the pictures.   ...
  • Page 37: Camera

    View picture  1. Click Album in the main menu.    2. Enter the album and click a folder to view the pictures in it.    3. Click the desired picture to view it in full screen automatically.  4. To zoom in the picture, put your two fingers on the screen and separate them  (shut your fingers to zoom out), or double click the screen.    Tips: when viewing the picture, you can slide it left or right to switch to previous or next  one.                  Editing and setting pictures                  When  the  picture  is  displayed  in  full  screen,  click  the  menu  button  to  display  menu  options, you can select to edit and set the pictures according to need. ...
  • Page 38: Fm Radio

     Operate and switch the camera: click Menu button, then click switch front/rear camera, as  shown in figure 5.5.  Switch front/rear   camera   Photo Video mode Panorama       Figure 5.5  Submenu 6.5. FM Radio    Click    icon in the main menu or desktop to enter main interface of radio:                                 ...
  • Page 39    Radio  Channel list ON/OFF Submenu   Bookmark Current frequency Previous Next     Figure 5.6     Search channel: click Menu button in the radio and click Search, the system will search  for channels automatically. The found channels will be saved in channel list.   Record  FM:  click  Menu  button  and  click  RecordFM  button  entre  into  the  FM  record  mode you can record the channels which you like in figure 5.7                          Figure 5.7   ...
  • Page 40: Internet

     Set as favorite:    button in the main menu to set the channel as favorite and  click  store it into the channel list.    7. INTERNET  7.1 Browser    When wifi or mobile network is connected (refer to 4.1 Wireless and network), click the browser      in the main menu or desktop to enter IE interface, as shown in figure 7.1  Address bar Current running View bookmark URLS and history     Figure 7.1    Click  the  address  bar  to  enter  the  URL  and  then  click  start  to  visit  and  browse  the  website.  As  shown in figure 7.2 ...
  • Page 41: Email

      Figure 7.2  7.2 Email    The Email app provides a email setup wizard.  You can add POP3 or  IMAP email accounts of  the  common Web email service providers (such as Yahoo, Gmail, 163, etc.). As shown in figure 7.3    Figure 7.3  a. Email setting ...
  • Page 42 1.Click    icon, the email setup wizard will help you through the setting.  2.Enter your Email address and Password.  3.Click Next to check whether the email server is available.  4.Enter the account name and the display name, then click Complete.  5.If the email is available, it will be saved in your inbox automatically.    b. Delete email account  You can delete the POP3 or IMAP email accounts from your MID.  1. Click  .    2. Enter your inbox.    3. Click menu button (menu).  4. Click Setting.  5. Select the account you want to delete in the drop down list.  6. Click Confirm to delete it.      c. Send an E‐mail  1. Click    to display your inbox.  2. Click inbox to refresh the email list, and click one to read it.  3. Click menu button to popup the menu.    4. Click    at the to right corner to compose a new email.    5....
  • Page 43: Gps Function

    Add  attachment                                                                                  Figure 7.4   ...
  • Page 44   Back up      Figure 8.1    After positioning successfully, the blue part will become green. The latitude, longitude, elevation  and time of your location will be displayed. As shown in figure 8.2.  The star level stands for the strength of the signal. The time of positioning is related to the time  zone you have selected. If the positioning time is different with the actual local time, please check  whether the time zone is correctly selected.    Satellite  value      Figure 8.2  Satellite number ...
  • Page 45: Other Apps

    9. OTHER APPS  9.1 Clock    Click Clock to enter the interface as shown in figure 9.1.  You can see Clock, Picture, Music and Home buttons.    Set    Alarm    Clock    Figure 9.1  9.2 Calculator    1. Click  .  2. Enter calculator interface.  3. Click the numbers and operators on the calculator to make calculations.   ...
  • Page 46: File Manager

      Figure 9.2  9.3 File manager    In the file manager you can copy, cut, delete, and rename the files or folders in the TF card.  You can also share and install apk files here.    In the main menu or desktop, click the File manager icon    to enter it. Internal  storage  SD card    Figure 9.3 ...
  • Page 47   a. To copy, cut, delete or rename the file or folder: select a file or folder, click and hold it to enter  the  interface  as  shown  in  figure  9.4,  where  you  can  conduct  relevant  operations  to  such  file  or  folder.     Figure 9.4    b. Share a file: select a file, click and hold it, select “Share” in the popup list, and select the way of  sharing in the popup list.    Figure 9.5    c. Install apk file: select a .apk file in the file manager, a installation wizard will popup, then you ...
  • Page 48: Audio Recorder

    can install such third party app following the instructions.    d.  New  folder:  select  the  directory  where  you  want  to  create  a  new  folder,  click    in  to  top  right corner, select new folder, and continue according to the instructions.  9.4 Audio recorder    In  the  main  menu  or  desktop,  click  the  icon    to  enter  audio  recording  interface.  Click  the  Record ...
  • Page 49: Installing Apps

    10. INSTALLING APPS  10.1 Install  Install third party apps                  You  can  acquire  third  party  Android  app  via  Internet  and  install  it  into  the  MID.  Copy the .apk file of the app into the SD card and insert into the MID.  1. Click “File manager”, then select the app you want to install.  2. Click and hold the app you want to install.    3.   In the popup installation option, click Install apk.  4.   Follow the installation wizard.                    Note: the third party apps acquired from the Internet are all .apk files.  10.2 Uninstall ...
  • Page 50: Troubleshooting

    11. TROUBLESHOOTING  1. The first startup takes longer time                    Each  time  after  system  upgrade  of  MID,  the  system  will  reinstall  necessary  apps  after first startup, and this process may take about 2 to 3 minutes. In the future  this problem will not occur again.    2. MID can not connect to WIFI   Make sure the wireless router works properly.   The MID should not be too far away from the wireless router, and there should  not be all separations between them, such as walls.   Make sure the input username and password are correct.    3. MID gets hot  When more than one apps are opened at the same time, or when the brightness is ...
  • Page 51 7. GSM responses slowly at times   This  is  normal.  Please  close  the  apps  you  are  not  using  in  senior  task  management, or uninstall some apps to release system ressource.  12. RÉGLAGES      WIFI ET RÉSEAU  Vous pouvez sélectionner la puce SIM qui sera celle  par défaut lors d’un appel vocal, d’un appel vidéo ou  Paramètres par défaut  de  l’envoi  d’un  message,  ou  lors  d’une  communication.  Gestion  de  la  puce SIM  Information SIM  Activer/ désactiver (ON/OFF) la puce SIM  Se  connecter  au  service  Roaming  (transfert  de  Roaming (déplacement) ...
  • Page 52 Remarques : si vous choisissez le système Android,  la sonnerie provient de la mémoire interne du  téléphone.  Si vous choisissez l'explorateur de fichiers ES, la  sonnerie provient de la carte mémoire externe..  Informations    de défaut  Silencieux  Sélectionner le mode Silencieux seulement  Réunion  Sélectionner le mode Vibreur seulement  Extérieur  Sonnerie plus forte et vibreur  Régler  la  luminosité  de  l'écran  en  agissant  sur  le  Luminosité  curseur  ,  et  puis  en  appuyant  sur  « OK ».  Fond d’écran  Choix du fond d’écran  Rotation automatique de  Ajuster  automatiquement    l'orientation  lorsque  l'écran ...
  • Page 53: Specifications

    accréditations  d'autres documents.  Langue  Configurer la langue par défaut du système  Clavier  et  méthode  de  Configurer  la  méthode  de  frappe  par  défaut  du  Langue et  frappe  système et du clavier.  entrée  Vocal  Recherche vocale  Souris /clavier tactile  Ajuster la vitesse de déplacement du pointeur  Sauvegarde  et  1. sauvegarde/ restauration des données  réinitialisation  2. Restauration des paramètres d'usine.  COMPTES  Compte  Ajouter un compte (entreprise, email, Google, etc.)    SYSTÈME  Date et heure  Configurer et changer la date et l’heure de l'appareil.  Marche/ arrêt  Configurer l’allumage /extinction de l’appareil  programmée  Fonction  Réglages de la rotation automatique de l'écran, de la police de l'écran, des effets ...
  • Page 54   CPU  Dual Core / 1.3GHz / MTK8312      Operating    ANDROID V4.2  system    WIFI  Support WIFI    3G/2G, EDGE, Bluetooth, G‐sensor, GSM/GPRS, SMS/MMS,  Support    Emails, FM radio, Calendar, play store, GMAIL etc.    Speaker    Built‐in speaker    Earphone  Jack 3.5mm  Built‐in 2 cameras:    Camera  ‐ camera on front 0.3MP      ‐ on backside 5.0MP    Zoom  X8    Supported  MP3,WMA,MP2,OGG,AAC,M4A,MA4,FLAC,APE,3GP,WAV    formats  Picture  JPG, JPEG, GIF, BMP, PNG ...
  • Page 55  SAR (Specic Absorption Rate)      = Head : 1 W/kg **    = Body : 1.75W/kg **    ** The SAR (Specific Absorption Rate) for mobile phones indicates the user's maximum exposure  level to electromagnetic waves when used at the ear. According to French regulations, the SAR  should not exceed 2 W/Kg of bw."    BATTERY REMARKS:  The operation time of the battery depends on conditions such as:  • Transmitting power level  • Signal (distance between the phone and the base station)  • Network parameters defined by the operator  • Phone use (WAP, games, SMS)  • Charging procedure used    Exclusions:  Subject to the exclusions contained below:  1. Damage due to the improper use.  2. User does not follow the manual.  Explanation:  The company has the final right of the explanation for this document.  Software upgrades will not be announced.  All pictures are for reference only in the instruction book; please refer to the actual phone.      WITH FULL POWER, THE PROLONGED     LISTENING CAN DAMAGE THE EAR OF THE  ...
  • Page 56     We certify that the power supply is used as a device for    disconnecting the power distribution network, which      should stay easily accessible.       “Declaration of conformity available on simple request”      RECOMMENDATIONS FOR USE  The following recommendations should help you limit your exposure to radio waves.  Use earphones (or hands‐free kit) during phone calls.  Exposures to radio waves are reduced as soon as you move the mobile away from your body (head  and trunk).    The use of earphones reduces the exposure of your head. This advice is especially aimed at very  intensive users.  When using earphones, teenagers and pregnant women are advised to keep the mobile phone  away from their lower abdomen.  You should also comply with the conditions of use set by the manufacturer in the instruction  manual. This may indicate a distance to be maintained between the trunk and the mobile phone.    SAFETY AND RESTRICTIONS FOR USE  Please check the instruction manual provided by the manufacturer.  Do not call while driving  Using a mobile phone while driving, with or without a hands‐free kit, can provoke a serious  accident.  Make phone calls preferably in areas where signal reception is good.  Your phone automatically adjusts its transmission power based on the radio signals received from  your network operator.  When radio reception is good (4 or 5 bars on the phone screen), the phone emits weaker  radiations: your exposure to radio waves is reduced accordingly.  Advise your children and teenagers to use mobile phones moderately.  Make sure they know the means to reduce their exposure when using mobile phones.  Health effects were demonstrated on children and teenagers because they are more susceptible,  since their bodies are under development. ...
  • Page 57 Bluetooth,  A2DP,  in  order  for  Bluetooth  devices  to  communicate  with  one  another,  they  must  utilize the same Bluetooth Profile. The warranty is applicable only for phones; the company is not  responsible  for  any  loss  or  theft.  Always  use  INOVALLEY  original  Enhancements  (including  batteries) for safety. The use of any other type may invalidate and approval or warranty applying  to  the  mobile  phone  and  may  be  dangerous.  The  phone  is  designed  to  operate  using  Li‐ion ...
  • Page 58 4. Don’t of disposal of equipment     Never dump E‐waste in garbage bins or municipal solid waste stream.     Do not dispose of your product as unsorted municipal waste.     Do not throw used batteries into household waste.   Do not dispose damaged or leaking Lithium Ion (Li‐Ion) battery with normal household waste.  5. Information  on  the  consequences  of  improper  handling,  accidental  breakage  damage  and  improper recycling of the end of life product.  3. If  batteries  are  not  properly  disposed  of,  it  can  cause  harm  to  human  health  or  the  environment. ...

Table of Contents