Personalization Features - Chevrolet Corvette 2009 Quick Start Manual

111844_09a_Corvette_GTK_052108.qxp:Corvette 2007 A
Getting to Know Your Corvette
14
and temperature gages, performance
shift light, check gages warning light
and G-force gage. The following HUD
controls are located on the instrument
panel to the left of the steering wheel.
MODE: Press this button to scroll
through the three HUD modes of Street
Mode, Track Mode 1 and Track Mode 2.
PAGE: Press this button to
customize the HUD modes as they
are being displayed.
: Press the up or down arrow to
adjust the up-and-down position of the
HUD on the windshield. (It cannot be
adjusted side-to-side.)
+ – : Press the (+) button to increase
the brightness and the (–) button to
decrease the brightness of the
HUD image.
Off: To turn off the HUD image, press
and hold the (–) button.
If you change your seat position, you
may have to readjust the HUD image
for proper viewing.
If the ignition is on and you cannot see
the HUD image, check to see whether:
• Something is covering the HUD unit
• The brightness is adjusted properly
• The HUD image is adjusted to the
proper height
• Ambient light is low in the direction
your vehicle is facing
• A fuse is blown (see Fuses and Circuit
Breakers in your Owner Manual)
• The windshield and HUD lens are
clean (do not spray glass cleaner
directly on the HUD lens)
• You are wearing polarized
sunglasses, which could make the
image harder to see
See Section 3 of your Owner Manual.
5/21/08

Personalization Features

Your Corvette offers personalization
capabilities that allow you to program
certain features to a preferred
setting for two different drivers.
Personalization features will be
recalled when the vehicle senses the
Keyless Access transmitter as the door
is opened, when the Lock or Unlock
button on the transmitter is pressed,
or when the appropriate Memory
button on the driver's door is pressed.
Available Personalization
Features include:
Auto Memory Recall (Automatic
Transmissions only) (if equipped) —
Driver's seat, outside rearview mirrors
and telescopic steering wheel move
to memory-set driving position.
(Settings: YES/NO)
Auto Exit Recall (if equipped) —
Driver's seat and telescopic steering
wheel move to memory-exit position.
(Settings: YES/NO)
Approach Lights — Activate parking
lamps, high-beam headlamps and
back-up lamps when you approach the
vehicle. (Settings: ON/OFF)
Twilight Delay — Parking lamps and
high-beam headlamps remain on
for a selected period of time after
exiting the vehicle. (Settings:
OFF/15S/30S/90S)
10:12 AM Page 14