Dodge Challenger SRT8 2012 Owner's Manual page 209

• Digital Speedometer
To access, press and release either the UP or DOWN
arrow button until "Performance Features" appears in
the EVIC, then press and release the SELECT button.
Press the UP or DOWN button to cycle through the
features. Press the SELECT button to select a feature.
The following describes each feature and its operation:
0-60 mph (0-100 km/h)
When selected, this screen displays the time it takes for
the vehicle to go from 0 to 60 mph (0 to 100 km/h) within
10 seconds.
• The feature will "ready" when the vehicle speed is at
0 mph (0 km/h). The word "READY" will flash when
conditions are met for the event to begin.
• Dashes will display if the vehicle fails to reach 60 mph
(100 km/h) in less then 10 seconds.
UNDERSTANDING YOUR INSTRUMENT PANEL 207
• The time will continue to display until the SELECT
button is pressed.
• Pressing the SELECT button will clear the current run
time and display the vehicle's best 0-60 mph
(0-100 km/h) time.
• To clear the vehicle's best 0-60 mph (0-100 km/h) time,
press and hold the SELECT button for five seconds.
Braking Distance
When selected, this screen displays the vehicle's braking
distance and the speed at which the brake pedal was
depressed.
• This feature will only function when applying the
brakes at speeds above 30 mph (48 km/h).
• Engaging the parking brake will disable this feature.
• The word "READY" will flash when conditions are
met for the event to begin.
4