Table of Contents
Advertisement
Driver Controls
Compass zone adjustment
1. Determine which magnetic zone
you are in for your geographic
location by referring to the zone
map.
2. Turn ignition to the ON position.
3. Locate the reset button on top of
the compass sensor mounted behind
the mirror.
4. Press and hold the reset button
on the compass module for
approximately 5 seconds until
COMPASS ZONE XX appears in the
message center display.
5. Continue to press the reset button until the correct zone appears in
the message center display.
6. After 4 seconds ZONE IS SET will
appear in the message center
display.
7. The display will flash and then
return to normal operation. The
zone is now updated.
50
2007 Mariner (mrn)
Owners Guide (post-2002-fmt)
USA (fus)
3
2
1
4
5
6
7 8 9 1011
15
14
13
12
Hide quick links:
Advertisement
Table of Contents
