Hyundai 2006 Sonata Owner's Manual page 182

3
WHAT TO DO IN AN EMERGENCY
10
D060I01E-AAT
8. Lower Vehicle and Tighten Nuts
D060I01NF
Lower the car to the ground by turning
the wheel nut wrench counterclock-
wise.
nfhma-3.p65 10
HNF4013-A
Then position the wrench as shown in
the drawing and tighten the wheel nuts.
Be sure the socket is seated com-
pletely over the nut. Do not stand on the
wrench handle or use an extension pipe
over the wrench handle.
Go around the wheel tightening every
other nut until they are all tight. Then
double-check each nut for tightness.
After changing wheels, have a techni-
cian tighten the wheel nuts to their
proper torque as soon as possible.
3/9/2005, 10:46 AM
Wheel nut tightening torque:
Steel wheel & aluminium alloy wheel:
65-80 lb.ft (900-1,100 kg.cm)
D060J02O-AAT
After Changing Wheels
HNF5016-A
If you have a tire gauge, remove the
valve cap and check the air pressure. If
the pressure is lower than recom-
mended, drive slowly to the nearest
service station and inflate to the correct
pressure. If it is too high, adjust it until