Toyota Echo 2001 User Manual page 97

Echo 2001
Hide thumbs Also See for Echo 2001:
Table of Contents

Advertisement

1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station (see "TUNE" knob or
"SEEK" button). Push and hold down the
button until you hear a beep—this will set
the station to the button. The button num-
ber will appear on the display.
To tune in to a preset station: Push the
button for the station you want. The but-
ton number and station frequency will ap-
pear on the display.
These systems can store one AM and two
FM stations for each button (The display
will show "AM", "FM1" or "FM2" when you
push "AM" "FM1·2").
(Program)
Push "
" to select the other side of a
cassette tape. The display indicates which
side is currently selected ("
" indicates
top side, "
" indicates bottom side).
Auto–reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
2001MY ECHO (U) L/O0008
(Reverse/Fast forward buttons)
Cassette Player
Push the fast forward button to fast for-
ward a cassette tape. "FF" will appear on
the display. Push the reverse button to
rewind a tape. "REW" will appear on the
display.
To stop the tape while it is fast forward-
ing,
push
the
fast
forward
button or
"TAPE"; to stop the tape while it is re-
winding,
push
the
reverse
button
"TAPE".
If a tape side rewinds completely, the cas-
sette player will stop and then play that
same side. If a tape fast forwards com-
pletely, the cassette player will play the
other side of the tape, using the auto–re-
verse feature.
Compact Disc Player
If you want to fast forward or reverse
through a compact disc track, push and
hold in the fast forward or reverse button.
When you release the button, the compact
disc player will resume playing.
2001 ECHO (OM52440U)
AM
Push "AM" to turn on the radio and select
the AM band. "AM" will appear on the
display.
If the audio system is off, you can turn
on the radio by pushing "AM". Also, push
"AM" to switch from cassette or compact
disc operation to radio operation.
CTRL / MODE (Audio control and mode
adjustment)
or
Manual tone adjustment function—
This knob is used to adjust the tone
manually.
For
low–pitch
tone
adjustment,
"CTRL / MODE" repeatedly until "BAS"
appears on the display. Then turn the
knob to suit your preference.
The display will show the range from
"BAS –5" to "BAS 5".
For
high–pitch
tone
adjustment,
"CTRL / MODE" repeatedly until "TRE"
appears on the display. Then turn the
knob to suit your preference.
The display will show the range from
"TRE –5" to "TRE 5".
push
push
97

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents