Switching On For The First Time - Topfield TRF-2470 User Reference

NOTE
Enable Dolby Digital output by changing the audio setting
to bitstream. See
2.5 Switching on for the first time
Now that you have your digital receiver connected, you should
plug it into a wall socket. Ensure that your television set is
turned on and on the correct video channel so that you will be
able to see the display from the digital receiver.
Before switching on the digital receiver, you should insert bat-
teries into the remote control. Open the battery compartment
by removing the lid, and then insert the batteries observing the
polarity, which is marked on the base of the battery compart-
ment.
Press the
trol. In a little time, you may see a picture displaying a menu.
If you do not see a picture, try pressing the
remote control. If after several tries you still get no picture,
check that the television is set to the correct input. If the picture
is good, you can skip to
and radio services. Otherwise, you may need to temporarily
connect the Composite video connector (VIDEO) to your tele-
vision set so that you can see the menu in order to configure
the video settings.
CAUTION
If the digital receiver no longer reacts properly to the remote
control commands, the batteries may be flat. Be sure to re-
place only with 1.5 V AAA size batteries, and observe the
following precautions.
§4.1.3 for more details.
button on the top left corner on the remote con-
§3.1
• Do not mix different types of batteries, or new and old
batteries.
2.5 Switching on for the first time 15
£
¢ ¡
VF
to search for available television
button on the