Advertisement
5. Roll out the slat roll (8) onto the support rail on the inner side of side rail (3) of upper bed. Secure each slat by long screw
(G) at two ends using a Phillips head screwdriver (Not Included).
(G)
(32x)
6. Attach the wood block (7) to the top post of lower end panels (2) by inserting wooden dowel on the wood block (7) into the
top holes post of the lower end panels (2).Insert the metal dowels (H) through the holes on the wood block (7).
(H)
(4x)
Date: 21-October-2011
Rev:
32x
4x
Page 5/7
Advertisement
