Horizontal (Top-To-Bottom) Mirror Image - Bernina Embroidery Module Owner's Manual

BERNINA
Horizontal Mirror Image
(Deco 330 and artista 200E only)
Deco 330
Select indicated motif. Select
Editing tab. Use the positioning
arrows to move the motif down.
Select Pattern selection tab.
Select motif again. Touch Hori-
zontal Mirror Image. Use the
positioning arrows to move the
motif up.
Embroider. Press the carriage
return after finishing the last
section to return the carriage to
the stored position.
Trim; mount on following page.
artista 185E
n/a
BERNINA
M Y
ASTERING OUR
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA
®
Embroidery Module/Machine
artista 165E
n/a
artista 200E
Select the indicated motif.
In Edit 1, select the Medium hoop.
Select Duplicate Motif symbol.
There are now two copies of the
motif on the screen.
Go to Edit 2. Touch Horizontal
Mirror Image (up/down) symbol.
The active motif is flipped. Move
it to the upper end of the hoop.
Retrieve the other motif and
move it to the lower end of the
hoop. Touch OK.
Stitch, trim and mount sample.
E M
®
MBROIDERY ODULE
/M
ACHINE
Mastering
Your
BERNINA
Notes
Embroidery Motif
Deco 330
#19 - fancy border
artista 165E
n/a
artista 185E
n/a
artista 200E
#14 - little wild rose
Fabric & Stabilizer
8" x 10" rectangle
Dealers
®
®
36