User Controls - ADEMCO AMC15LCD Installation And Operating Instructions Manual

USER CONTROLS - Menu Operations
PC
Pressing the MENU button will bring up the Menu shown above.
Select the item you want to adjust using the ,
As shown, the Brightness may be adjusted with the or
To exit the menu, press the MENU button.
(This process stores the new settings which you have selected.)
Brightness is used to adjust the light output of the
to black.
Contrast is used to adjust the light output of the
White.
Clock is used to adjust best picture quality. The clock adjusts the number of
pixels in the horizontal line. Therefore it can affect the picture poisition and size
horizontally.
Phase is used to adjust best picture quality. It adjusts the sampling phase across
one pixel time. When the phase is not adjusted properly, the picture quality is not
good. Therefore this value should be carefully adjusted.
Auto
Select "Yes" using or buttons to adjust the best picture quality automatically.
Execute repeatedly if the picture quality is not good.
H Position is used to adjust the horizontal position of the image on the screen.
V Position is used to adjust the vertical position of the image on the screen.
RGB Offset
RGB Offset is used to adjust the video input range. When the bright areas of the
picture is too high (low), increase (decrease) the RGB Offset value.
Image Effect is used to soften or sharpen the image.
Volume controls the output of the internal speakers.
Brightness
Contrast
Clock
Phase
Auto
H Position
V Position
RGB Offset
Image Effect
Volume
Language
Input
Recall
15-Inch Color Monitor
: 25
: 41
: 125
: 16
: Stop
: 0
: 0
: 0
: 5
: 10
: English
: PC
: No
buttons
buttons.
darkest
brightest areas of the picture to
areas of the picture
12 AMC15LCD