GoPro Hero 3 Silver Edition User Manual page 17

caPtUre settinGs
You can customize the way your HERO3 camera captures Video and Photos in the
Capture settings menus, such as upside Down, Looping Video and White Balance.
UPSIDE DOWN
Mounting your HERO3 upside Down but wish the files to appear upright when
viewing or editing? This setting eliminates the need to flip your Video or Photos
after recording.
Camera right side up (Default)
Camera upside down
SPOT METER
Turn on spot meter when filming from within a dark space pointing the
camera into a brighter setting, such as filming the outdoors from within a car.
When spot meter is set to on,
OFF (Default)
ON
32
appears in the LCD window.
LOOPING VIDEO
Looping Video mode allows you to record a continuously looping video that
overwrites itself until you press the
not available if Protune mode is turned on.
Looping Video options inlcude:
OFF (Default)
Camera records until memory card is full, then overwrites with a
Max video
new video.
Camera records for 5 minutes, then begins a new video,
5 min video
progressively overwriting the previous 5 minute video.
Camera records for 20 minutes, then begins a new video,
20 min video
progressively overwriting the previous 20 minute video.
Camera records for 60 minutes, then begins a new video,
60 min video
progressively overwriting the previous 60 minute video.
Camera records for 120 minutes, then begins a new video,
120 min video
progressively overwriting the previous 120 minute video.
Multiple chapter files are written to your memory card. This
allows for small segments of content to be overwritten during
Pro
loop recording. When viewing on a computer screen you will see
tiP:
separate files for each time segment. Use video editing software if
you wish to combine files into a longer video.
note: Looping Video is not enabled when in Protune mode.
caPtUre settinGs
button to stop it. Looping Video is
33