Hitachi CM 7MR Technical Data And Service Manual page 9

Wall chaser

Hide thumbs Also See for CM 7MR:

Table of Contents

(11) Loosen the four Hex. Socket HD. Bolts M4 x 20 [86] and then remove Dust Cover (B) [87] from Dust

Cover (A) [77].

(12) Loosen the four Hex. Socket HD. Bolts M5 x 12 [58]. Remove the Gear Box Bracket [57] from Dust

Cover (B) [87] and then remove the Gear Box Cramp [83].

Perform reassembly by reversing the order of the disassembly procedure.

Refer to the TECHNICAL DATA AND SERVICE MANUAL for each base model—G 23SR (List No. E273),

G 23SRU (List No. E274) and G 23SC3 (List No. E254)—for precautions on disassembly and reassembly,

lubrication points, types and amounts of lubricant, tightening torque, and the wiring diagrams.

Reassembly

-6-

Table of Contents