Table of Contents
Advertisement
MAINTENANCE
Start in Gear Protection
The remote control connected to the outboard must be equipped with a start-in-gear protec-
tion device. This prevents the engine from starting in gear.
Avoid serious injury or death from a sudden unexpected acceleration when starting
your engine. The design of this outboard requires that the remote control used with
it must have a built in start-in-gear protection device.
Warning Horn Requirement
IMPORTANT: Warning Horn Requirement – The remote control or key switch assem-
bly must be wired with a warning horn. This warning horn is used with the engine
warning system.
Selecting Accessories For The Outboard
Genuine Quicksilver Parts and Accessories have been specifically designed and tested for
this outboard.
Some accessories not manufactured or sold by Quicksilver are not designed to be safely
used with this outboard or outboard operating system. Acquire and read the Installation, Op-
eration, and Maintenance manuals for all selected accessories.
Dual Engine Center Line Dimension
a -
b -
c -
d -
Page 1D-2
b
28.5 in. (724 mm)
12.5 in. (317 mm)
17.8 in. (453 mm)
32 Degree
WARNING
c
d
a
90-888465 JUNE 2002
Hide quick links:
Advertisement
Table of Contents
