Broadcast Audio Options; Speaker Settings; Additional Settings - Samsung TC300 3 Series User Manual

Basic Features
¦
Sound Systems, Etc.
MENUm Sound ENTERE

Broadcast Audio Options

Audio Language
(digital channels only)
Change the default value for audio languages.
The available language may differ depending on the
broadcast.
Audio Format
(digital channels only)
Select the audio format.
Audio Description
(not available in all locations) (digital
channels only)
This function handles the Audio Stream
for the AD (Audio Description) which is
sent along with the Main audio from the
broadcaster.
Audio Description (Off / On): Turn
the audio description function on
or off.
Volume: Adjust the audio description volume.

Additional Settings

(digital channels only)
DTV Audio Level (MPEG / HE-AAC): This function allows
you to reduce the disparity of a voice signal (which is one
of the signals received during a digital TV broadcast) to a
desired level.
According to the type of broadcast signal, MPEG /
HE-AAC can be adjusted between -10dB and 0dB.
To increase or decrease the volume, adjust between
the range 0 and -10 respectively.
Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a voice
signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
Select Line to obtain dynamic sound, and RF to
reduce the difference between loud and soft sounds
at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.

Speaker Settings

Speaker Select (External Speaker / TV Speaker):A sound
echo may occur due to a difference indecoding speed
between the main speaker and theaudio receiver. In this
case, set the TV to External Speaker.
When Speaker Select is set to External Speaker,
the volume and MUTE
the sound settings will be limited.
When Speaker Select is set to External Speaker.
x
TV Speaker: Off, External Speaker: On
When Speaker Select is set to TV Speaker.
x
TV Speaker: On, External Speaker: On
If there is no video signal, both speakers will be mute.
It's not available for TC300 series.
Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience
compared to Normal mode, making almost no noise. It is
useful at night.
Reset Sound (Yes / No)
Reset all sound settings to the factory defaults.
¦
Selecting the Sound Mode
When you set to Dual fg, the current sound mode is displayed
on the screen.
Audio
Type
Mono
A2
Stereo
Stereo
Dual
Mono
NICAM Stereo
Stereo
Dual
If the Stereo signal is weak and an automatic switching,
occurs, then switch to the Mono.
Only activated in stereo sound signal.
Only available when the input Source is set to TV.
buttons will not operate and
t
Dual f-g
Default
Mono
Automatic
change
Stereo Mono
Dual f Dual g Dual f
Mono
Automatic
change
Mono Stereo
Dual f
Mono
Dual f
 Dual g 
English
26