Advertisement
Dear Customer,
Thank you for purchasing Figure's 2005-Present Dodge
Charger Grille set. These grilles are fabricated employing
quality materials and finishes, and have been engineered to
enhance the look of your vehicle for the duration of its life.
Proper installation is essential to your overall satisfaction, so
please read these instructions before attempting to install the
grilles. Exercise patience; these instructions are intended to
assist even the most mechanically challenged.
Remember, if you are not 100% satisfied with our product,
simply return the set to us (or to the retailer if you did not
purchase directly through Figure) within 30 days of purchase
for a complete refund.
We always love to see pictures of the installed grilles, so we
encourage you to email us your best!
(Send to
Info@FigureLLC.com)
Package Contents:
QTY(2) Upper Grilles
QTY(2) Lower Grilles
*QTY(1) Full-Width Lower Grille
QTY(30) Nylon Ties, 4" (High-tensile-strength, UV-resistant)
*QTY(10) Tie Mounts (22 gage galvanized steel wire)
QTY(1) Instruction Manual
Tools Required for Installation:
Angle cutters (snip pliers)
Drill
Drill bit, 1/8" & *1/16"
Screwdriver, medium slotted
Screwdriver, small slotted
Screwdriver, low-profile Philips (Fig. 1)
*Needle nose pliers
* With full-width lower grille option.
3
Advertisement
