Troubleshooting Tips; Problem Solver - GE Profile WPGT9350 Owner's Manual And Installation Instructions

For a complete list of solutions to common washer problems, use the
Troubleshooting Tips feature located by pressing the HELP button
while on the washer Home Screen (see Using the Troubleshooter).
If your washer will not operate, check the Problem Solver below:
Problem
Washer won't operate
Possible Cause
Control panel is asleep
Washer is unplugged
Water supply is turned off
Controls are not set properly
Lid is open—safety feature.
Prevents the washer from filling
and operating when lid is up.
Circuit breaker/fuse is
tripped/blown
Electronics need to be reset
START was not pressed after a
cycle was set
Extremely low water pressure
Washer is too cold

Problem Solver

www.GEAppliances.com
What To Do
• This is normal. Press POWER, the Touch Screen
or any button to activate the control panel.
• Make sure cord is plugged securely into a working outlet.
• Turn both hot and cold faucets fully on.
• Make sure the cycle was set correctly, close the lid and
press START.
• Close lid and reset cycle, to the beginning if necessary.
Press START.
• Check house circuit breakers/fuses. Replace fuses or
reset breaker. Washer should have separate outlet.
• Unplug washer, wait 2 minutes, plug back in and press
POWER.
• Press START.
• Press START again.
• If the washer has been exposed to temperatures below
freezing for an extended period of time, allow it to warm
up before pressing POWER. Otherwise, the display will
not come on.
29