Important Safety Instructions; Water Heater Safety; Proper Installation; Your Laundry Area - GE Profile WPGT9350 Owner's Manual And Installation Instructions

Profile washers

Hide thumbs Also See for Profile WPGT9350:

Table of Contents

WARNING!

This washer must be properly installed and located in accordance with the Installation Instructions before it

is used. Installation Instructions are included in the back of this manual.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING.

For your safety, the information in this manual must be followed to minimize the risk of fire or

explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

Under certain conditions, hydrogen gas may be produced in a water heater that has not been used for two

weeks or more. Hydrogen gas can be explosive under these circumstances.

If the hot water has not been used for two weeks or more, prevent the possibility of damage or

injury by turning on all hot water faucets and allowing them to run for several minutes. Do this

before using any electrical appliance which is connected to the hot water system. This simple

procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not

smoke or use an open flame or appliance during this process.

• Install or store where it will not be exposed

to temperatures below freezing or exposed

to the weather.

• Keep the area underneath and around your

appliances free of combustible materials such

as lint, paper, rags, chemicals, etc.

• Properly ground washer to conform with all

governing codes and ordinances. Follow

details in Installation Instructions.

• Close supervision is necessary if this

appliance is used by or near children. Do not

allow children to play on, with or inside this

or any other appliance.

Table of Contents