What You Will Need; Connections - MediaMatrix CAB 8n Hardware Manual

Chapter 4 - Installing the CAB 8n
.

What you will need


A MediaMatrix NION with CobraNet interface.

The latest NWare software. (Updates can be downloaded from the MediaMatrix website
(http://mm.peavey.com/downloads/index.cfm).)

A computer running Microsoft Windows, with monitor, mouse and keyboard.

An assortment of CAT 5e or CAT 6 cables.

At least 1 CAB 8n.

An audio source, cables, power amplifier and loudspeaker.

A small Phillips screwdriver.

A small flat-blade screwdriver.

A network switch connected to the CobraNet network.
Note: The selection of a proper network switch is critical for a successful implementation.
Although CobraNet is an Ethernet protocol, there are performance issues that must be
considered when selecting this switch for use in CobraNet audio systems.
In MediaMatrix, the minimum CAB 8n CobraNet system consists of a single NION, a CAB 8n
and a single Ethernet switch. Many systems will include more NIONs and CAB devices, but
this is the most basic configuration.

Connections

CobraNet network connection
The first priority is the CobraNet™ network connection. The RJ-45 connectors on the
CobraNet interface are designed to connect with standard, off-the-shelf Category 5, 5e or 6
cable for use with standard Ethernet network switches.
Notes:

The network must be properly designed for each system. If you lack experience in
networking, we suggest that you partner with someone with networking experience.

Gigabit switches are recommended.

CAT 5e or CAT6 cables are recommended.
A typical CobraNet system includes a connection from each CAB to a network switch. An
additional network cable connects the switch to one or more NION CM-1 cards.
Note: The example below is the most basic configuration. Large systems on managed
networks can get very complex. We recommend that you get this configuration working
before attempting a more complex one.
16 Version 1.7.1.0 July 23, 2014