Page 1
Models 3034/3038 Multiport Asynchronous Statistical Multiplexer Quick Start Guide Important —This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment.
Page 2
• This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. WARNING • Mains Voltage: Line voltages are present when the power cord is con- nected. The mains outlet shall be within 10 feet (3 meters) of the device, shall be easily accessible, and protected by a circuit breaker.
(See Figure 2 on page 4). External Power (AC) An LPS 120/240V AC to 5VDC adapter is supplied with the EUI version of the Model 3034/3038. The female plug on the AC power cord plugs into the male AC connector on the adapter.
Connecting to the PC’s ENET port Figure 3. Configure your PC’s Ethernet port to be on the same subnet as the 3034/3038. Open a Telnet connection to the default LAN IP address of the 3034/3038 (192.168.200.10). Log into the unit using the following:...
Trinity[eth-eth0]# ip address 192.168.1.1 netmask 255.255.255.0 2.5 Saving the IP address To save the unit’s IP address: Login to the unit using admin, then use the following set of commands: Trinity# [eth-eth0]# end Trinity# copy running-config startup-config Trinity# Model 3034/3038 Quick Start Guide...
3.0 Connecting the RS-232 ports Model 3034 has four RS-232 ports. Model 3038 has eight RS-232 ports. RS-232 Ports 0-7 Connecting the RS-232 ports Figure 5. To connect a cable to the RS-232 port: Attach the male connector of the twisted pair cable to the female connector on the unit.
4.0 Connecting the Composite port 4.1 Models with an X.21 port Plug the X.21 WAN cable’s DB-15 male end into the DB-15 connector (labeled Composite on the 3034/ 3038. Plug the other end of the cable into the X.21 device.
The conformity to the above directive is indicated by the CE sign on the device. The signed Declaration of Conformity can be downloaded from www.patton.com/certifications/. A.3 Authorized European Representative D R M Green, European Compliance Services Limited. Oakdene House, Oak Road , Watchfield, Swindon, Wilts SN6 8TD, UK Model 3034/3038 Quick Start Guide...
8:00 am • 5:00 pm EST (1300 UTC/GMT)—by calling 2200 +1 (301) 975-1007 Support via VoIP: Contact Patton free of charge by using a VoIP ISP phone to call sip:support@patton.com • Fax: +1 (253) 663-5693 • Alternate Patton support for Europe, Middle East, and Africa (EMEA) Telephone support: Standard telephone support is available five days a week—from...