Memory-map Adventurer 2800 Quick Start Manual page 5

Adding maps Adding maps
Choose from a wide range of additional maps pre-loaded on microSD card and
simply swap cards in or out as you need them, or choose whole or sections of
map from your Memory-Map v5 collection on your PC.
1) Turn on Adventurer and view main menu.
Connect Adventurer 2800 to PC using USB cable provided.
Tap USB mass storage. Adventurer will appear as two 'discs' on
your PC.
2) Open Memory-Map on your PC.
3) Open the map you want from your map list.
4) Draw a route around the area you want, right click the
route and use Operations > Enclosed Area > Send to
Mobile Device. Alternatively, scroll / zoom the map to the area
you want and select Mobile Device > Send Map or Send Visible
Map Portion.
5) Name the map section eg. Sherwood Forest, 1:50k, select 'Storage
card on PC' and click
choose the Maps folder. Click
Share routes, tracks & waypoints Share routes, tracks & waypoints
'ADV2800SD'
. Select from the drive list and
OK
.
Uploading and downloading information between
Memory-Map and the Adventurer 2800 is easy. Share routes,
tracks, waypoints and other POIs quickly and simply.
1) On Adventurer 2800 tap the Settings & Overlay icon
2) Overlay > Save As... and name your overlay.
3) Connect to PC via USB. Tap USB mass storage
4) Open Memory-Map on PC and use the Overlay >
Import menu. Browse to the Userdata folder in the
Removable DIsk > Maps folder on your computer.
5) Click Open.
6) See the Memory-Map Installation Guide for details on
managing your overlays.
To send overlays from PC to Adventurer 2800 simply
right-click on the route or mark and save directly to the
ADV2800SD > Userdata folder.
4 • UK