Dimensions - Yamaha MT8X Operation Manual

MIXER
Frequency Response (At Rated Input and Output)
Noise level (12.7 kHz: 6 dB/oct. L.P.F)
Signal process noise:
STEREO OUT:
S/N Ratio (At Rated Input and Output Levels)
Distortion (1 kHz, At Rated Input and Output)
Equalizer
RECORDER
Overall Frequency Response
Overall S/N ratio
Overall Distortion
Overall channel separation
(between adjacent channels)
Erasure Rate
Noise Reduction
GENERAL
Control Jacks
Power Requirements
Power Consumption
Dimensions (WxHxD)
Weight
Accessory
* dbx is a trademark of dbx Incorporated.
0 dB = 0.775 Vr.m.s.
All specifications subject to change without notice.

DIMENSIONS

44
+1 dB
20 Hz-20 kHz
-4
-115dB/Rs=150
-80 dB/CH, optimum position of the Master Fader
68 dB/IHF-A MIC IN-STEREO OUT (GAIN TRIM MAX.)
70 dB/IHF-A LINE IN-STEREO OUT (GAIN TRIM MIN.)
0.3 %/30 kHz L.P.F MIC IN-STEREO OUT (GAIN TRIM MAX.)
0.05 %/30 kHz L.P.F LINE IN-STEREO OUT (GAIN TRIM MIN.)
LOW/SHELVING
MID/PEAKING
HIGH/SHELVING
(4 track simultaneous recording)
50 Hz-14 kHz +3 dB (dbx NR OFF)
-5
80 dB/IHA-F (dbx NR ON), (At distortion level of 3 %)
2% (400 Hz,-10 dB)
60 dB (1 kHz, -10 dB, dbx NR ON)
55 dB (1 kHz, 0 dB)
dbx NR (SYNC position: TR8 = OFF)
PUNCH I/O (FC4 or FC5)
REMOTE CONTROL (RCM1)
U.S. & Canadian Models: 120 V AC, 60 Hz
UK Model: 240 V AC, 50 Hz
General Model: 230 V AC, 50 Hz
40 W
489 mm X 129 mm X 390 mm (19 -1/4" X 5 -1/16" X 15 - 3/8")
7.0kg(15 lbs. 6oz.)
AC power cord, cotton swab
MIC IN-STEREO OUT
LINE IN-STEREO OUT
LINE IN-PHONES OUT
Standard Frequency 100 Hz
Standard Frequency 1 kHz
Standard Frequency 10 kHz
Variable Range ±12 dB
Variable Range ±12 dB
Variable Range ±12 dB