Unpacking; Connecting; Startup - BELINEA 2485 S1W Operating Instructions Manual

UNPACkING

Carefully lift the monitor out of the packaging and make
sure that all components are included (see fig. 1).
Save the original box and packing material in case you
have to ship or transport the monitor.
To set up the device, you must fit the monitor base toge-
ther. you can adjust the height of the base. When the
base of the monitor is extended, you can tilt the monitor
90° (Pivot function).

CONNECTING

 To connect the monitor to your PC........................
1. Make sure that the PC and monitor are unplugged.
. Connect the 15-pin signal cable to the monitor and
the PC (see fig. 2a).
. The monitor is equipped with a DVI-D connector. If
you have a graphic card with a digital DVI-D con-
nector (24-pin socket), then connect one end of the
DVI-D cable (optional) to the DVI-D connector of your
monitor (see fig. 2b), the other end to the computer.
POWER
USB upstream port
USB downstream port
Figure 2a. Connecting the monitor to the PC
 To connect the monitor to the power source ........
Connect the separate power cable (
monitor and a grounded outlet.
 Connecting the audio cable....................................
If your computer is equipped with an audio output port,
then connect one end of the sound cable to the audio
input connector of the monitor (
end to the Line-Out connector of the computer.

STARTUP

1. First start your PC and then turn on your Belinea
monitor using the power switch (
status indicator (  in fig. 4) should light up green.
DVI-D D-SUB AUDIO IN
Signal cable
in fig. 3) to the

in fig. 3) and the other


in fig. 4). The
Figure 1. Monitor with swivel base
POWER
Figure 2b. Connection via the DVI-D interface
POWER
1
Figure 3. Connecting the monitor to the power source
 USB Ports.................................................................
The monitor features five USB ports: one upstream
and four downstream ports (see fig. 2a).
. Adjust the image to meet your requirements (see the
following sections "Basic Setup" and "Image settings
using the OSD menu").
. If there is no image displayed on the monitor, consult
the section "Troubleshooting".
Belinea 2485 S1W - Operating Instructions - 
ENGLISH
Power cord
Audio cable
VGA cable
USB cable
DVI-D cable
(optional)
DVI-D D-SUB AUDIO IN
DVI-D D-SUB AUDIO IN
2