Unpacking; Serial Number; Features - Martin Audio E1300 Manual

CONTENTS
Standards Applied
1
Every Martin Audio E1300 Amplifier is built to the highest standards and is
thoroughly tested and inspected before it leaves the factory. After
unpacking the amplifier, examine it carefully for any signs of transit
damage, and inform your dealer if any such damage is found. It is
suggested that you retain the original packaging so that the unit can be
returned at a future date if necessary.
Please note that Martin Audio and its distributors cannot accept
responsibility for damage to any returned product through the use of none-
approved packaging.
2
Every E1300 amplifier has an individual serial number marked on the rear
of the unit. Please make a separate copy of this number and quote it on
any correspondence referring to the amplifier. This serial number provides
us with technical data exclusive to each amplifier.
3
1. Plug in front panel module facility eliminating the need for external
controllers
2. High frequency switching power supply, with on board intelligent control
3. Custom heat exchanger with massive surface area and turbulent flow
4. Intelligent inter-dependent logic controlled power supply and audio
protection circuits
5. Dual fan 4-stage thermal control, ensuring the amplifier will provide
maximum performance under any condition
6. Dual die output devices providing high current and reactive load
capabilities
7. Automatic protection against severe amplifier clipping
All material © 2007. Martin Audio Ltd. Subject to change without notice.
<
PRINT
This equipment conforms to the requirements of the
EMC Directive 89/336/EEC, amended by 92/31/EEC
and 93/68/EEC and the requirements of the Low
Voltage Directive 73/23/EEC, amended by 93/68/EEC
EMC Emission
Immunity
Electrical Safety

UNPACKING

SERIAL NUMBER

FEATURES

Martin Audio – E1300 Amplifier
>
EN55103 - 1: 1996
EN55103 - 2: 1996
EN60065: 1998
2
GUIDES