Table of Contents
Advertisement
• Attach the floor brush to the Extension
Tubes (7), which snap together. Then attach
>the extension tube assembly to the Steam
>Gun (13). Ensure the Extension Tubes (7) are
>firmly connected.
• Before cleaning always remove dust from the
surface you wish to clean.
• To release the Extension Tubes (7) depress
>the button on the hose connection.
Cleaning floors & carpets with cleaning
cloth.
• While the SteamStation is switched off attach
the Towel (4) to the Floor Tool (8) via the
spring-loaded clips. Make sure the edges of
the Towel (4) are secure.
DO NOT attempt to do this while the
SteamStation is still hot.
• Never remove the Towel (4) while the safety
>trigger is released or the SteamStation is
warm to the touch.
WARNING - Risk of injury!
Fitting the Accessories
• The accessories may be fitted to the Steam
Gun (13) using Straight Adapter (5).
When fitting the Towel (4), Straight Adapter
(5) is required.
When using the Brushes (11) or high-
Angled Nozzle (10), Straight Adapter (5) is
>required.
When using the Floor Tool (8) use Swivel
Adapter (8a).
Cleaning and Maintenance
• Cleaning and maintenance operations should
be carried out with the SteamStation
disconnected from the power supply.
• The SteamStation should be allowed to
completely cool down before it is stored
away or cleaned.
• Clean the SteamStation and its accessories
with a slightly damp cloth only.
• Never use a cleaning product or detergent.
• To ensure that your SteamStation operates
correctly over a long period, rinse out the
water tank once a month to remove
lime-scale deposits. White vinegar solution or
>
a proprietary de-scaler solution can be used
>
to clean inside the water tank.
• There are no customer service parts for the
boiler unit, all repairs must be carried out by
a qualified person.
8
Advertisement
Table of Contents
