Tiger T6 User Manual page 15

E-4.2: Rename
You can press Yellow button to rename
the selected channel.
E-4.3: delete
Press the Red button to delete the
selected channel .
F: Motorised System
If you connect receiver to DiSEqC1.2 or
DiSEqC1.3 antenna,set Motorised system to
DiSEqC1.2 or USALS, Here press OK button
to enter motor system.
Satellite
Select the correct satellite what you want
to search.
Select the correct TP in this satellite to
detect the signal when motor is moving.
Position Auto To Drive the dish until find
the strong signal.
Continuously Move
Push / button, the dish will be
motorised to West / East to search the best
signal, release the button will stop the moving.
Step Size
Set the moving step.
Move Steps
Move East or West step by step.
Limit Set
Disable or enable West limit or East limit by pressing OK.
Save Position
Press OK button to save the current position you searched.
15